• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Small annoying problem

Ya this doesn't seem like such a big problem and I wasn't sure if I were to put it in the Pickups section or this one so here's the problem.
One of the soapbars on my ibanez BTB seems to easily get pushed down when on the factory installed height. When I tighten the screws the pickup go's lower and after a while when it's all the way down it won't push down anymore, problem is I like my pickups high and I actually did notice a better sound when they're higher IMO. So I set them back up to the normal height but it just kinda feels cheap that this pickup isn't as stable as the other one, it doesn't really affect anything else just the feel good factor. So has anybody had this problem with soapbars, is it normal and if not how would I go about fixing it?
 
Unless the pickup is moving and taking a new set because of vibration there is nothing wrong. If it bothers, then the proper course of action is to replace the springs with stiffer, longer springs. If the springs cause the pickup to be microphonic, replace the springs with short lengths of surgical tubing.
 
Unless the pickup is moving and taking a new set because of vibration there is nothing wrong. If it bothers, then the proper course of action is to replace the springs with stiffer, longer springs. If the springs cause the pickup to be microphonic, replace the springs with short lengths of surgical tubing.

ahah... now off to the surgical supplies shop I go... both pickups on my Peavey Millenium BXP are microphonic, it's in warranty, but I don't want to replace it under warranty only for the same thing to happen again... anyway, everything else about the Bass is fine, just don't want the lottery of a new one from the factory...