SPDIF input

[frnjplayer]

I'm hoping that someone has pulled this stunt off and can advise me. I have an 8x8 FireWire interface that no longer communicates properly. The I/O functions still seem to be working properly however. In addition to the FireWire port there is also an optical port on it.
Are there any ideas or recommendations for converting that optical signal to USB or ethernet?

 

[Basslice]

I am sure someone will correct me, but I was under the impression is that SPDIF is only useful to interconnect and expand interfaces and preamps. I don't think it is for communicating to a workstation like USB or ethernet.

 

[silky smoove]

The usual solution to this is to buy another interface that allows for SPDIF input. Connect the new interface to your computer via USB or ethernet (per the OP), connect the old interface to the new via SPDIF. You'll now have access to the I/O for both devices, but the non-I/O functions of the old interface won't do anything.

 

[frnjplayer]

That all makes sense. I believe I have the parts in house to make this work.
Thanks.

 

[Basslice]

The usual solution to this is to buy another interface that allows for SPDIF input. Connect the new interface to your computer via USB or ethernet (per the OP), connect the old interface to the new via SPDIF. You'll now have access to the I/O for both devices, but the non-I/O functions of the old interface won't do anything.

This is what I am planning on doing with my Scarlett 18i20 after I win this month's Sweetwater Giveaway:
Universal Audio Apollo Twin X QUAD

 

[Krisfield]

I looked into this a while back. The Markbass Vintage Preamp has a S/PDIF output. So I assumed you could connect the preamp to the computer via this type of interface.

ESI - U24 XL