Double Bass Top question

[masterbasss]

Hello,

Could anybody advise me how to sand a top just to increase the relief between dark and clear vein?


Thank you

 

[.matthew e wengerd.]

huh?

 

[Darren Molnar]

I think you mean texture, is that right, masterbass?

Scraping the wood, instead of sanding is the way to get that look.

the easy method to start with,if you don't have a lot of experience with scrapers, would be to scrape with those utility disposeable razor blades, and then burnish the wood with a white or grey scotchbrite pad. ( synthetic steel-wool, very very fine)

 

[1st Bass]

And when you are done, if you really want more relief, wipe it down quickly with a slightly damp rag. The soft grains will swell, and the wood will take on a distinct "corduroy" look.

I used to stain my wood (violins, violas) with coffee, before varnishing...of course the corduroy effect was heavily accentuated...some people liked it a lot; others were put off by it.

I used the damp rag on my bass, and it gave a nice "in-between" look, which I promptly sealed with shellac, then glazed to accentuate the color differences, and then proceeded to varnish.

 

[masterbasss]

I think you mean texture, is that right, masterbass?

, Yes quite right, I mean this.

Sorry, I know sometimes mi english is not the best and It´s hard to understand me.

Regards.

Invalid Link Removed
Invalid Link Removed
Spanish double bass forum
Nuevo foro del contrabajo en Castellano