Trace Elliot malfunction

[RuneMIkkelsen]

I have a Trace Elliot AH500x amplifier, and 2 trace Elliot cabinets of 4x10''. The amp has two outputs bouth with 4 ohm min load. Last time a played then one of the outputs and the cabinet connected to this output stoppede working. I have tryed all combinations with ouputs, cabinets and cables.

It doesent look like a soldering problem in the cabinet.
Does anyone have an idead of what might be wrong?

Thanks in advance

 

[RuneMIkkelsen]

any ideads?

 

[VtypeV4]

Is the ah500X the stereo/biamp model? 250 / 250w?

 

[Kelly Lee]

Is the ah500X the stereo/biamp model? 250 / 250w?

Yep, two 250 watt @ 4ohms power sections.

To the OP, I can't really guide you on what might be wrong but I would suggest having a good tech to take a look at it.

 

[jady]

Doesnt that amp have a mono/ stereo switch? check that, if it is stereo it will be looking for 2 seperate inputs.

 

[VtypeV4]

I'll second what kelly says... Its probabaly something simple like a relay like i had trouble with a few years ago... Good luck anyway.