What amp can do 2 ohms?

[HMZ]

I'm looking for an amp that is rated at 2 ohms in the 500-800 watt range. what are my choices?
Thanks

 

[bass dan]

Acoustic Image Focus, I think the Iamp800 will go to 2 ohms as well.

 

[Bassguy1]

PJB D600. 600 watts at 2 ohms.

D-600 NEW! | Phil Jones Pure Sound

 

[RNV]

Carvin will. My BX1500 will do it twice allowing you to run 4 4Ohm cabs at once.

 

[Essen]

Most if not all EBS heads.

 

[husky123]

Mesa M9

 

[Jim Carr]

Mesa Boogie Carbine M6 and M9, any SWR pro (350, 550, 750), most any PA-style power amp by Crest, QSC, Crown, and many others. Not most Ampeg, GB, GK, and MarkBass.

A link to a pdf list is in the Ohms sticky.

Here: http://www.3ms.com/bass/2ohms.pdf

 

[KramerBassFan]

VOX Super Beatle

 

[Holliwood]

Most high end tube amps will.
I think GK's and GB's will as well(don't quote me on that)

Traynor 800 watt hybrids will as well.

Marshalls will but the run 4 ohm with 1 cab/2 ohm with 2.

 

[sailri]

For $260-$300 (used) - Genz Neo-Pak 3.5:

275 W/425 W/625 W
8 ohm/4 ohm/2 ohm

 

[Jim Carr]

...[GK and] GB's will as well (don't quote me on that)...

GK MB Fusions, and Streamliners/Shuttles from GB won't. In general, micro heads don't.

 

[smogg]

Genz Benz GBE750 & GBE1200 will both do 2ohms. They have that neat little switch.
And if I recall the 1st GB micro could be modded at the factory to do 2ohms as well.

Carvin BX500 uses a switch to get to 2ohms as well. The BX1500 & B2000 will do 2 ohms




edit: Ah yes the Neo-Pak 3.5, that was a little darling of an amp.

 

[Jim Carr]

For $260-$300 (used) - Genz Neo-Pak 3.5:

275 W/425 W/625 W
8 ohm/4 ohm/2 ohm

Tru dat!

 

[dukeisdog]

Genz Benz GBE750 & GBE1000 will both do 2ohms. They have that neat little switch.
And if I recall the 1st GB micro could be modded at the factory to do 2ohms as well.

Carvin BX500 uses a switch to get to 2ohms as well. The BX1500 & B2000 will do 2 ohms




edit: Ah yes the Neo-Pak 3.5, that was a little darling of an amp.

As well as the GBE 600 I believe too.

 

[CL400Peavey]

Peavey Mark VIII XP 602 watts at 2 ohms.

 

[JohnnyChatter]

A lot of amps will. Choose one you like. Why are you asking for 2 ohms if you don't mind me asking?

 

[eyeballkid]

The Sunn 1200s/fender bassman 1200, the fender 300pro, svt cl and vr, Ashdown abm 900 (runs two power amp outputs @ 4ohms each), fender mb1200 with whatever pre ya want and the fender 1200 TB?...GB 1200...mesa big block I think..

 

[HMZ]

A lot of amps will. Choose one you like. Why are you asking for 2 ohms if you don't mind me asking?

Because i have a 210 and a 410 cab that are both 4 ohms. I was thinking of pairing them up for an out door gig.

 

[Noctune]

Peavey Nitrobass head 450 watts can go down to 2ohms

 

[CL400Peavey]

If that 210 was 8 Ohms I would say go for it. An impedance mismatch like (the 210 will get the same amount of power as the 410, straining the speakers on the smaller cab more) that isnt recommended.

Because i have a 210 and a 410 cab that are both 4 ohms. I was thinking of pairing them up for an out door gig.