• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Winter Build off 2020 - The Bubble Wand.

Got the neck profile carved. Decided to cut out the fret access. Clear material for control mounting will be here today.

Looking a little weird.

IMG_2154.jpg
 
So, decided to just wing the control plate.
IMG_2157.jpg


Kinda draw the shape...

IMG_2158.jpg


Cut it out on the bandsaw.

IMG_2159.jpg


Scratch around it and route a ledge.


This is the backside, you can see the wire tunnels. I'll have to keep the wiring clean here as it will be on display.

It's a good job the blue plastic protection is tough. And yes, the plastic is actually clear.

IMG_2160.jpg
 
I'm expecting more damage then that. While cool effect it is really not structurally sound.
The piece down the center is the only structure this needs and it will be fine. The horn is pretty solid but I can see where a sharp blow might split it. Just have to be careful.
This Tele I did has held up very well

5A947DA5-E56C-441F-8D17-12E66D799B20.jpeg
 
What I'm really hoping for is that you are secretly planning to hide an actual bubble machine somewhere on this instrument and surprise us all at the last minute with a video of your bubble want making bubbles while you play it.

Wonderful Wonderful :D

Doe this means he has to play Lawrence Welk stuff, or better yet....Tiny Bubbles?