I have an X2 XDR95 wireless system, and I'm getting no output from it at all. I've done all the troubleshooting, e.g., checking the battery, cables, power source, etc. but nothing I try works. I've tried each channel, and nothing works, either. Previously, I've never had a problem with it. I get the green lights indicating that the batteries in the transmitter are fine, but no green lights indicating a signal. No RF interference, either. On the transmitter itself, one channel light will flash blue, and another red, regardless of which channel I choose. Anyway, I thought I'd put this out there to see if anyone else with an X2 has experienced the same problem, and what they did to solve it. Also, if there are any Line 6 reps on the forum, feel free to chime in. Thanks in advance.