I am looking to sell my Bunny Brunel for $950.00 shipped in the continental U.S. via paypal. It is in excellent physical condition and everything works perfectly. I paid $1600 but understand the options I chose may not be exactly what you are looking for.
Trades are unlikely but you can ask (assuming what you are offering was at least $1500 out the door when new). In any case, I would lean heavily toward a passive.
It is for sale locally but I can pull that within a few minutes of any real interest here.
General Specs:
34" scale
alder body
asymmetrical rear neck contour (neck is thinner on the treble side)
ebony fingerboard with a 14" radius
neck width = 1.75" wide @ nut, 3.0" wide @ 24th fret
Hipshot A-style bridge with strings-though-body
24 medium-jumbo frets, .103 wide X .048 tall
J9A alnico single coil/HB2 humbucker pickup combination
18V active/passive, volume, pickup blend, stacked concentric bass and high frequency, stacked concentric mid frequency and sweep
dimensions = 45 3/8" long, 13 3/8" wide, 1 5/8" thick body
My additional specs:
CLEAR SATIN MATT FINISH
FIGURED CLARO WALNUT TOP
5PC LAMINATED MAPLE AND WALNUT
NECK NOT SHOWN ON TOP OF BODY
FIGURED WALNUT HEADSTOCK
ROSEWOOD FRETBOARD
NO TOP INLAYS-SIDE DOTS ONLY
STAINLESS STEEL FRETS
REPLACE H50S WITH J99
ONE COIL SPLITTING SWITCH
GOLD PLATED HARDWARE
GOLD PLATED Carvin LOGO
HIPSHOT BASS DETUNER INSTALLED


Trades are unlikely but you can ask (assuming what you are offering was at least $1500 out the door when new). In any case, I would lean heavily toward a passive.
It is for sale locally but I can pull that within a few minutes of any real interest here.
General Specs:
34" scale
alder body
asymmetrical rear neck contour (neck is thinner on the treble side)
ebony fingerboard with a 14" radius
neck width = 1.75" wide @ nut, 3.0" wide @ 24th fret
Hipshot A-style bridge with strings-though-body
24 medium-jumbo frets, .103 wide X .048 tall
J9A alnico single coil/HB2 humbucker pickup combination
18V active/passive, volume, pickup blend, stacked concentric bass and high frequency, stacked concentric mid frequency and sweep
dimensions = 45 3/8" long, 13 3/8" wide, 1 5/8" thick body
My additional specs:
CLEAR SATIN MATT FINISH
FIGURED CLARO WALNUT TOP
5PC LAMINATED MAPLE AND WALNUT
NECK NOT SHOWN ON TOP OF BODY
FIGURED WALNUT HEADSTOCK
ROSEWOOD FRETBOARD
NO TOP INLAYS-SIDE DOTS ONLY
STAINLESS STEEL FRETS
REPLACE H50S WITH J99
ONE COIL SPLITTING SWITCH
GOLD PLATED HARDWARE
GOLD PLATED Carvin LOGO
HIPSHOT BASS DETUNER INSTALLED

