I am including a link to a thread that this neck just sold on, and after the buyer loosened the truss rod he was unable to get it adjust back to as flat as he liked ... I had used this neck for several years, with flatwound Chromes and never had an issue ... I probably never put more than a total of a 1/2 turn on the truss rod the entire time I used it, always manually moving the neck into the position I wanted, and then putting a very slight turn on the truss rod to hold it ... the truss rod and nut is intact, and works fine ... it just will not bring the neck into a slight back-bow by itself (to straight under string tension) without maxxing out ...
I am likely done playing seriously after this summer concert series, and am in the process of minimizing stuff on hand, so now just moving this along at a good price (the machine heads sell for 1/2 of the price I am asking for the whole loaded neck) ... this did come back to me with a small scratch on the underside of the headstock that was unnoticed previously, I will try to include a pic of that as well ...
Link to previous sale thread ...
SOLD - Fender Reggie Hamilton Jazz Bass Neck ... Loaded!!
This neck is fully loaded, with vintage reverse tuning machines, and will also come with screws and neck plate ... consider the neck needing jig time, or washers, etc to put it in a back bow .. so priced accordingly ... These are very nice necks!!
$149 shipped ... to lower 48 only please
I am likely done playing seriously after this summer concert series, and am in the process of minimizing stuff on hand, so now just moving this along at a good price (the machine heads sell for 1/2 of the price I am asking for the whole loaded neck) ... this did come back to me with a small scratch on the underside of the headstock that was unnoticed previously, I will try to include a pic of that as well ...
Link to previous sale thread ...
SOLD - Fender Reggie Hamilton Jazz Bass Neck ... Loaded!!
This neck is fully loaded, with vintage reverse tuning machines, and will also come with screws and neck plate ... consider the neck needing jig time, or washers, etc to put it in a back bow .. so priced accordingly ... These are very nice necks!!
$149 shipped ... to lower 48 only please
