Price reduced to $1580 delivered in the USA (except for Alaska and Hawaii, which will require a bit extra in shipping costs).
Up for sale is my 2007 Mike Lull M4V 4-string in pearl white with a Rosewood board and active/passive Bartolini electronics. This bass was sent back to Mike for a thorough going-over and setup in early 2015, and because it was built pre-PLEK (Mike didn't start PLEKing his basses until about 18 months after this one was built), I had him to advise whether it needed a PLEK job on the frets, to which he responded "it's not really needed". I have owned five Mike Lull basses over the last 7 years, and have developed a very good relationship with Mr. Lull. This bass is in very nice condition, with just one small paint blemish near the bridge which I touched-up (see photos for detail).
Here are some more details regarding this bass (I purchased the bass from the original owner, who said that he had it custom-built for him; all info. came either from the sell or from Mike Lull himself):
Model: M4V Custom
Body Material: Alder
Body Paint Color: Pearlescent White
Neck Material: Hard Maple, 1-9/16" nut width (1/16" wider than a Fender Jazz Bass neck)
Fretboard Material: Rosewood (one of the prettiest and most nicely-detailed Rosewood boards that I have ever seen or played), 21 medium frets
Pickups: Bartolini CBJS-1 Jazz True Single Coils ... Bartolini CBJS-1 'Classic Bass' True Single Coil - BestBassGear
Preamp: Bartolini NTBT 18v (two 9v batteries), with push-pull active-passive switching
Controls: Volume, Pickup Blend, Tone (works in both active and passive modes) with pull for passive mode; stacked Bass/Treble boost and cut.
Hardware: Hipshot bridge and Tuners, plus D-tuner on the E-string Tuning Peg
Weight: 8 lbs., 6.5 oz.
Gig Bag: Mike Lull ProTec gig bag (see photo)
No trades at this time, please.
See photos below for more details, and please feel free to PM me if you have any questions or wish to discuss this bass in greater detail.
Up for sale is my 2007 Mike Lull M4V 4-string in pearl white with a Rosewood board and active/passive Bartolini electronics. This bass was sent back to Mike for a thorough going-over and setup in early 2015, and because it was built pre-PLEK (Mike didn't start PLEKing his basses until about 18 months after this one was built), I had him to advise whether it needed a PLEK job on the frets, to which he responded "it's not really needed". I have owned five Mike Lull basses over the last 7 years, and have developed a very good relationship with Mr. Lull. This bass is in very nice condition, with just one small paint blemish near the bridge which I touched-up (see photos for detail).
Here are some more details regarding this bass (I purchased the bass from the original owner, who said that he had it custom-built for him; all info. came either from the sell or from Mike Lull himself):
Model: M4V Custom
Body Material: Alder
Body Paint Color: Pearlescent White
Neck Material: Hard Maple, 1-9/16" nut width (1/16" wider than a Fender Jazz Bass neck)
Fretboard Material: Rosewood (one of the prettiest and most nicely-detailed Rosewood boards that I have ever seen or played), 21 medium frets
Pickups: Bartolini CBJS-1 Jazz True Single Coils ... Bartolini CBJS-1 'Classic Bass' True Single Coil - BestBassGear
Preamp: Bartolini NTBT 18v (two 9v batteries), with push-pull active-passive switching
Controls: Volume, Pickup Blend, Tone (works in both active and passive modes) with pull for passive mode; stacked Bass/Treble boost and cut.
Hardware: Hipshot bridge and Tuners, plus D-tuner on the E-string Tuning Peg
Weight: 8 lbs., 6.5 oz.
Gig Bag: Mike Lull ProTec gig bag (see photo)
No trades at this time, please.
See photos below for more details, and please feel free to PM me if you have any questions or wish to discuss this bass in greater detail.