For sale MAKE OFFER...EDEN World Tour Pro- PREAMP (WTP-PRE)

Rev. Cornelius

Jan 30, 2007

1,037

1,637

Boston, MA

• Feb 15, 2018

Do you know which jacks (if any) on the back are 1/4" TRS balanced and which are TS unbalanced. I did not see the info in the manual.

Thanks

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 15, 2018

I use the L and R outputs (1/4") into a Crown XLS1502 which has 1/4" input as well as the XLR and have never had ANY noise or sound issues. It does not state balanced, so I would have to assumed unbalanced. My signal to my speaker stack has been crystal clear.

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 15, 2018

You could use the D.I. output which I believe is balanced XLR....but then you would need a D.I. box to replace the D.I. output you might want to use to send to a power amp. I really have not had ANY issues at all with using the 1/4 " output to the power amp.

 

Rev. Cornelius

Jan 30, 2007

1,037

1,637

Boston, MA

• Feb 15, 2018

Some power amps don't work well with TS unbalanced (instrument level) input levels. Both my Aguilar and Demeter preamps have TS outputs and neither can fully drive the power amp (1.2v input sensitivity). However, the TRS line level from the Demeter (as well as any other TRS line level, ie mixing board) drive the amp fully. I did email Eden support but have not heard back yet.
Will let you know what I hear.
Thanks

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 15, 2018

I will be interested to read your response after you hear back from Eden.

 

Rev. Cornelius

Jan 30, 2007

1,037

1,637

Boston, MA

• Feb 15, 2018

Will do, if I do........

 

S

Stevevisits

Dec 23, 2017

122

53

• Feb 16, 2018

Still for sale? I'm curious about wondering if my sansamp will work as the eq and this for the power? Not sure if you know anything about that

 

dbsfgyd1

Jun 11, 2012

18,296

21,050

Mascoutah, IL

• Feb 17, 2018

road-cat1 said:

The ultimate bass guitar preamp. I have two of these, this is my backup and was only used a few times. Brand new condition, they are $1000 new. Look them up..WTP-PRE for specs. Hybrid tube bass preamp.

WTPPre | EDEN AmplificationView attachment 2912473

Click to expand...

I have the older WP-100 Navigator. It’s increadable. I understand there is a slight improvement with the compression with this latest test revision. Great price.

 

dbsfgyd1

Jun 11, 2012

18,296

21,050

Mascoutah, IL

• Feb 17, 2018

Stevevisits said:

Still for sale? I'm curious about wondering if my sansamp will work as the eq and this for the power? Not sure if you know anything about that

Click to expand...

These are not powered units.

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 17, 2018

Correct..this is a PRE-AMP with incredible tone shaping capabilities. HOWEVER, this is a PRE-AMP only and you feed this signal to any power amp. BTW, I have used the Pre-amp and sent it to a small but powerful shoulder bag amp (class D) effects return link and let the power section (800 watts) amplify the EDEN preamp signal. Worked perfectly. My main set-up at the theater is a Crown XLS-1502 powering my other EDEN pre-amp. I just am not using this one as it was a back-up that really was never needed.

 

S

Stevevisits

Dec 23, 2017

122

53

• Feb 17, 2018

I'm sorry totally read it wrong...I was thinking power amp. I have Eden cabs and was looking for a head unit. What do you guys normally use for power amps for this? Very good price on this

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 17, 2018

I would enthusiastically recommend the lightweight class D power amp that I use, which is a CROWN XLS1502. It can drive a 2 ohm load and in the bridged setting (which I use) into a 4 ohm load, it gives 1550 watts of clean power. ( I use 2 -8 ohm cabinets to equal the 4 ohm load in bridged.) Here are the specs:
Crown XLS 1502

and it sells for $399 @ Amazon and others.
https://www.amazon.com/Crown-XLS150...989&sr=8-1-spons&keywords=crown+xls1502&psc=1

 

road-cat1

Supporting Member

Mar 24, 2008

1,570

1,874

Mesa, AZ

• Feb 17, 2018

Even if you run it NON-bridged with an 8 ohm cab on each power output, it would give a VERY conservative 300 watts into each cabinet. Crown has a reputation of understating their wattge ratings, by the way. I know that there are MANY other brands (QSC, CREST, etc..) but the Crown has a switchable input sensitivity that some of the others do not have. It will allow you to get full output because not all pre-amps have the same output voltage.

 

S

Stevevisits

Dec 23, 2017

122

53

• Feb 17, 2018

Oh ok gotcha...I know Eden use to make just a power amp but guess they stopped making it? This is a nice preamp I don't know if I have room for power an pre already have an 8 space rack but I might be able to switch out the sansamp heard these make some amazing sounds. I'm going to see posting my Mesa Subway 800+ shortly

 

moogieotter

Custom Title

Jun 16, 2009

713

909

53

Duluth, GA

• Feb 23, 2018

Loves me ole Navie pre. This one also pretty. GLWS!