743F4412-97D4-4DF8-8697-E6B93FCB0948.jpeg

For sale Aria Pro II TSB-400 Thor Sound - MEDIUM SCALE!

Sold
$420.00
Strings
4
Status
This item has been sold and is no longer available!

Details

3037EA2A-BF2E-47E8-A197-EC0A432030CE.jpeg


***AVAILABLE AGAIN -- Buyer had to back out due to unexpected car repair expense...***

Aria Pro II Thor Sound TSB-400 Model (1981-82)
4-string
32.25” / 820mm scale
22 frets (recently crowned and polished
Nato/Maple/Nato body
3-piece Maple neck
Rosewood fretboard (edges and fret ends have been nicely rolled/polished)
Split-coil MB-II pickups (reverse-P configuration)
Volume-Volume-Tone controls
44mm at the nut
17.5mm spacing at the bridge
8lbs 3ozs

The quality of these old Matsumoku built MIJ Arias was exceptional, and this bass feels, plays and sounds fantastic! It is in excellent condition with a few minor marks and a light scratch near the neck pickup that has been drop-filled and leveled, but not yet polished and buffed (shown in the pics below). Properly polished and buffed, the scratch would disappear.

The MB-III pickups on this thing are monsters! They are the most powerful passive pickups I have ever played, but they also dial back quite nicely. It has a pot/cap combo that works very well, with tones that range from really big, fat punchy sound down to a true dub tone. When I got the bass, the neck pickup had a minor short in it, so I had Kent Armstrong re-wind it to spec and, as usual, he did an amazing job.

It is worth noting that the necks on these old Arias, which I have to say feel fantastic, are unique in that they do not taper dramatically. The neck is 44mm at the nut, 51mm at the 12th fret and 55mm at the 22nd fret.

I love this bass (by far my favorite 4-string) and do not want to sell it, but I really don’t have a choice. I need to liquidate virtually all of my music gear to pay medical bills for a family member who has just been diagnosed with cancer. (I will be listing at least 6 other basses for sale this weekend).

I must raise cash so, please, no trade offers.

$420 for local pickup.

CONUS Shipping: $30 east of the Mississippi, $45 west of the Rockies, or $40 anywhere in-between. The bass will be shipped via UPS, safely packaged with the neck removed and fully insured.

The bass will come with the D'Addario EXL160 Nickel XL Roundwounds (50-70-85-105) that are currently on it. The following very lightly used sets of strings that I had on this bass previously are also available for $16 each, $30 for two sets, $42 for three sets, or $52 for all four sets:

  • D'Addario ENR70 XL Half Rounds (40-60-75-95) - played for less than an hour
  • EB Slinky Cobalt Flatwounds (50-70-85-105) - played for only a few hours
  • D'Addario Chromes (45-65-80-100) - played for only a few hours
  • Fender 9120M Nylon Tapewounds (.058-.110) - played sporadically for a couple of months
I also have a new set of D'Addario ECB81M Medium Scale Chromes (45-65-80-100) for $24 if you want them.
Please send any questions via PM

Thanks for looking!

CC66B681-3C6E-4002-85DB-F5F42BF597DF.jpeg
3BB38E3D-6D28-40FE-964C-5B00DBAB35D0.jpeg
D9149EEE-B36E-424B-9E37-12A9BAC02791.jpeg
A8D35884-3480-401E-B65B-674B0A5B0BF1.jpeg
6D580769-6CB3-4D58-B019-C0A9CE71B527.jpeg
E897FF05-19F3-4C43-9E1D-E4C1A3918077.jpeg
73771DF5-568A-4072-B552-BA003FEA25BC.jpeg


08B2D94E-C2E6-407F-A026-785ADB7367B1.jpeg 80E6A846-E9E6-4084-80AF-434A7F30D80B.jpeg EE240CE5-522E-4583-8DF0-0D074B1B5A60.jpeg 1702FFCA-FF9A-4EC9-94DA-870DF75F46D6.jpeg 63F0E914-AA7B-458B-905C-D5700E3BF86C.jpeg 90FA8F87-8982-4889-8D4B-AB07FEC56981.jpeg 4310BE10-8725-4B0C-B306-9D5C84774303.jpeg
  • 743F4412-97D4-4DF8-8697-E6B93FCB0948.jpeg
    743F4412-97D4-4DF8-8697-E6B93FCB0948.jpeg
    421.1 KB · Views: 301
  • 8B3B8E13-E429-4D6D-9263-6F7028DAA956.jpeg
    8B3B8E13-E429-4D6D-9263-6F7028DAA956.jpeg
    467 KB · Views: 104

Comments

Sep 28, 2014
1,401
2,332
56
Near Boston
These are remarkable basses, I have one of them, and I have to tell anyone looking at this that this is an incredibly high quality instrument. If I was not thinning the herd myself, I’d buy this to have defretted so I’d have a matching pair. No affiliation, I am a shill for these arias not the seller!
 
Feb 4, 2018
2,980
5,678
Georgia
Can you measure the nut? I’m hoping you just copied the specs from somewhere and it’s actually not 1-3/4” wide...
No, I didn’t copy the specs, but I was off by 1mm on my original measurement. It is 44mm at the nut. The necks on these old Arias, which I have to say feel fantastic, are unusual in that they taper very little. While the neck is 44mm at the nut, it is only 51mm at the 12th fret and 55mm at the 22nd fret.
 

Classified ad information

Posted by
Cutter8
Feedback score
+159 /0 /-0
Category
For Sale: Bass Guitars
Views
11,124