This is a 2010, if I interpret the SN right, standard Squier P neck. It is however 1 1/2 inches wide at the neck. Made in Indonesia. I never noticed this before but the SN ends in 666 in case you are sensitive to such things. I'm indifferent I guess. Overall its in nice shape with barely noticeable fret wear. Truss works as it should and there's no pop on the skunk stripe. There are some small finish chips at the tip of the headstock (see pic). There are also some small lines in the finish on the back of the neck that you will feel under your thumb. Not deep but like it got leaned against a hard surface (see pic).
You will also notice a mark on the back of the neck up towards the headstock. Its totally under the finish with no defects in that area. As far as I can tell it occurred naturally in the wood.
$60.00 delivered in the CONUS
You will also notice a mark on the back of the neck up towards the headstock. Its totally under the finish with no defects in that area. As far as I can tell it occurred naturally in the wood.
$60.00 delivered in the CONUS
-
back.jpg -
backScratches.jpg -
front.jpg -
grain.jpg -
headStockBack.jpg -
headStockFront.jpg -
hsChips.jpg -
mark.jpg