! All health/safety precautions will be taken during pickup/exchange ! (if local)
The Series I put Alembic on the map for good reason - the eye-catching shape, hi-fi filter-based preamp, and its unmistakable sound and presence.
This bass was built in 1978 and is in remarkable condition for its age. No peghead repairs or aftermarket non-Alembic electronics.
Stats:
Serial Number: #78 1122
Body: Myrtle top and back, mahogany core. Zebrawood veneer peghead with mahogany ears.
Strings: 4
Frets: 24
Scale: 34"
Pickups: two single coil pickups, with hum-cancelling dummy "middle pickup"
Controls: pickup selector (standby/neck/both/bridge), two volume knobs, two filter sweep knobs, two 3-position switches for the boost at the cutoff frequency.
Also has Schaller Straplocks installed.
The 1/4" cable jack is wired for stereo, so you would need a 1/4" stereo to mono cable if one were to run the bass off battery power.
Includes the OHSC which is a little worn but fully functional. Also includes 18v outboard power supply/signal splitter and two 5-pin cables - one 20', one 40'.
Partial trade offers considered if you're local.
The Series I put Alembic on the map for good reason - the eye-catching shape, hi-fi filter-based preamp, and its unmistakable sound and presence.
This bass was built in 1978 and is in remarkable condition for its age. No peghead repairs or aftermarket non-Alembic electronics.
Stats:
Serial Number: #78 1122
Body: Myrtle top and back, mahogany core. Zebrawood veneer peghead with mahogany ears.
Strings: 4
Frets: 24
Scale: 34"
Pickups: two single coil pickups, with hum-cancelling dummy "middle pickup"
Controls: pickup selector (standby/neck/both/bridge), two volume knobs, two filter sweep knobs, two 3-position switches for the boost at the cutoff frequency.
Also has Schaller Straplocks installed.
The 1/4" cable jack is wired for stereo, so you would need a 1/4" stereo to mono cable if one were to run the bass off battery power.
Includes the OHSC which is a little worn but fully functional. Also includes 18v outboard power supply/signal splitter and two 5-pin cables - one 20', one 40'.
Partial trade offers considered if you're local.
