**SOLD**
I have a Nemesis practice am sitting here, hardly used it. I mainly used it for playing in my basement. It is in great shape...here is the info:
Small, yet it hits hard.
This micro combo will astound you with its punch and depth. The N28S works with 4- or 5-string basses and is stunning in its output level and tonal quality. Its 120W power section pushes this little unit right along. It's a killer small rig for recording, close-proximity gigs, individual practice, and rehearsals you have to haul your gear to.
Nemesis N28S Silver Series Bass Combo Specifications:
Power: 120/170W RMS @ 8/4 ohms (8 ohm internal impedance)
Tweeter: T1004
Speakers: 2 x ES832
Crossover: 4kHz @12dB
Power Handling: 160W RMS
Frequency Response: 40Hz - 18kHz
Sensitivity: 100dB SPL@1W1M
Impedance: 8 ohms
Dimension: 20-1/2"W x 16-1/2"H x 13-1/4"D
Weight: 47 lbs.
Features:
120W FET power
2 x 8" bass drivers and tweeter
Dual inputs
RCA and 1/4" aux inputs with gain and tone balance on aux input
Gain, 3-band EQ, and Enhance on main input
Master volume
Headphone output
Extension speaker output
Speaker mute switch
Pre-EQ effects loop
XLR recording out with volume control and signal level switch
I have a Nemesis practice am sitting here, hardly used it. I mainly used it for playing in my basement. It is in great shape...here is the info:
Small, yet it hits hard.
This micro combo will astound you with its punch and depth. The N28S works with 4- or 5-string basses and is stunning in its output level and tonal quality. Its 120W power section pushes this little unit right along. It's a killer small rig for recording, close-proximity gigs, individual practice, and rehearsals you have to haul your gear to.
Nemesis N28S Silver Series Bass Combo Specifications:
Power: 120/170W RMS @ 8/4 ohms (8 ohm internal impedance)
Tweeter: T1004
Speakers: 2 x ES832
Crossover: 4kHz @12dB
Power Handling: 160W RMS
Frequency Response: 40Hz - 18kHz
Sensitivity: 100dB SPL@1W1M
Impedance: 8 ohms
Dimension: 20-1/2"W x 16-1/2"H x 13-1/4"D
Weight: 47 lbs.
Features:
120W FET power
2 x 8" bass drivers and tweeter
Dual inputs
RCA and 1/4" aux inputs with gain and tone balance on aux input
Gain, 3-band EQ, and Enhance on main input
Master volume
Headphone output
Extension speaker output
Speaker mute switch
Pre-EQ effects loop
XLR recording out with volume control and signal level switch