$1350.00. Trying not to break forum rules so I am making this post as short as possible and to the point. Amp is like new and has been in my studio covered most of it's life. Please PM me with questions or offers.
Specs:
Accepts 2, 4, and 8 ohm loads
Tuner Out with Mute
Self-Diagnostic Protection Circuit and Thermal Overload Protection Circuit (both with LED Indicators)
Short Circuit Protection
Power Output: 750 watts @ 4 ohms, 975 watts @ 2 ohms.
Preamp Section: Three 12AX7s and one 12AU7
Power Section: 12 complimentary lateral MOSFETs
Transformers: Custom Aguilar toroidal power transformer.
EQ Section: Tube-driven shelving type treble (+/ - 12dB @4kHz), mid (+/ - 12dB @ 400Hz), and bass (+/ - 12dB @ 40Hz) controls.
Deep Switch: Adds 3db of broad-band boost at 30 Hz.
Bright Switch: A passive RC pre-emphasis circuit at 5-7 kHz.
Effects Loop: Send pot is push/pull for line or instrument level; return pot is push/pull for parallel or series operation.
Inputs: One 1/4" input jack with an active/passive switch. One 1/4" power amp input.
Outputs: Two Neutrik Speakon speaker outputs, one Jenson XLR balanced output (-32dB pre- and post-EQ) with a ground lift switch, and one 1/4" jack preamp output.
Cooling: High quality whisper fan
Power Requirement: 100, 120, 230 VAC 50 - 60 Hz
Dimensions: 19" W x 14" D x 5.25" H
Rack Size: Three Spaces
Weight: 43 lbs
Specs:
Accepts 2, 4, and 8 ohm loads
Tuner Out with Mute
Self-Diagnostic Protection Circuit and Thermal Overload Protection Circuit (both with LED Indicators)
Short Circuit Protection
Power Output: 750 watts @ 4 ohms, 975 watts @ 2 ohms.
Preamp Section: Three 12AX7s and one 12AU7
Power Section: 12 complimentary lateral MOSFETs
Transformers: Custom Aguilar toroidal power transformer.
EQ Section: Tube-driven shelving type treble (+/ - 12dB @4kHz), mid (+/ - 12dB @ 400Hz), and bass (+/ - 12dB @ 40Hz) controls.
Deep Switch: Adds 3db of broad-band boost at 30 Hz.
Bright Switch: A passive RC pre-emphasis circuit at 5-7 kHz.
Effects Loop: Send pot is push/pull for line or instrument level; return pot is push/pull for parallel or series operation.
Inputs: One 1/4" input jack with an active/passive switch. One 1/4" power amp input.
Outputs: Two Neutrik Speakon speaker outputs, one Jenson XLR balanced output (-32dB pre- and post-EQ) with a ground lift switch, and one 1/4" jack preamp output.
Cooling: High quality whisper fan
Power Requirement: 100, 120, 230 VAC 50 - 60 Hz
Dimensions: 19" W x 14" D x 5.25" H
Rack Size: Three Spaces
Weight: 43 lbs