I have a combo and add on cab (500 Watts of power between the 210s and 115)...I was wondering what benefit is there from running a speakon cable to the cab from the head than a 1/4 speaker chord?
Thank You
Thank You
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Why use speakon
- Thread starter et141311
- Start date
Not to be a jerk, but a search would provide tons of answers. Some of which include the fact that they lock, and provide more current transfer over a 1/4". And that whole thing about not being able to short out when you disconnect them 
1/4" plugs were never designed for that purpose, Speakons are. Plus there's the possibility someone may hookup a guitar cable between amp and cab...
Hi.
Yep, 1/4" standard comes from telephone switchbanks back in time of the manually operated switching. They were designed only for low power static applications.
IMHO speakons are the best that's available, why settle for anything inferior?
The benefits outweigh the drawbacks (if any?) 10:1
Just my 0.02
Sam
Yep, 1/4" standard comes from telephone switchbanks back in time of the manually operated switching. They were designed only for low power static applications.
IMHO speakons are the best that's available, why settle for anything inferior?
The benefits outweigh the drawbacks (if any?) 10:1
Just my 0.02
Sam
The contacts are also self-cleaning.
Whether you'll find a noticeable difference is only something you could answer, but it is a little telling that Walter Woods still (at least as far as I know) doesn't offer them, even on the all powerful Ultra.
Personally, I like speakon connectors and feel that it's one thing I don't need to worry about when I have them in place of 1/4" plugs.
Whether you'll find a noticeable difference is only something you could answer, but it is a little telling that Walter Woods still (at least as far as I know) doesn't offer them, even on the all powerful Ultra.
Personally, I like speakon connectors and feel that it's one thing I don't need to worry about when I have them in place of 1/4" plugs.
If you don't have speakon jacks on your amp.
If I did I would use them. Once the amp is out of warranty I'd be tempted to add the jacks myself.
If I did I would use them. Once the amp is out of warranty I'd be tempted to add the jacks myself.
Don't overlook the fact that 1/4" sufficed for many, many decades in thousands and thousands of high-powered bass amps. Even today they continue to suffice instead of or next to Speakons.
Speakons didn't even show up on bass amp radar in any meaningful way until about 10 years ago.
As always when I chime in with this opinion I get pounced on by the Speakon brigade who think I'm trying to say 1/4 is better. I'm not. I'm just saying 1/4 has worked well for a long time and few amps that offer Speakon do so exclusively. There's a reason for that.
Speakons didn't even show up on bass amp radar in any meaningful way until about 10 years ago.
As always when I chime in with this opinion I get pounced on by the Speakon brigade who think I'm trying to say 1/4 is better. I'm not. I'm just saying 1/4 has worked well for a long time and few amps that offer Speakon do so exclusively. There's a reason for that.
tend to agree
one reason it would be extra nice for a tube amp is the safety factor. An open load is not good for a tube amp and speakons would help prevent one possible scenario whereby a 1/4 loose and gets knocked out or gets shorted etc.
of course it doesn't do anything to remedy forgetting to plug it in
I have a SS backup amp --with speakon outs, and a tube amp (main gigging amp) without. If both of my amps had 'em, I might spend a few dollars extra for a bit more protection. I wish my SS (power amp) had 1/4 too for the flexibility.
one reason it would be extra nice for a tube amp is the safety factor. An open load is not good for a tube amp and speakons would help prevent one possible scenario whereby a 1/4 loose and gets knocked out or gets shorted etc.
of course it doesn't do anything to remedy forgetting to plug it in
I have a SS backup amp --with speakon outs, and a tube amp (main gigging amp) without. If both of my amps had 'em, I might spend a few dollars extra for a bit more protection. I wish my SS (power amp) had 1/4 too for the flexibility.
I always used 1/4 until I bought a new amp with only speakon outputs. Never had a problem but I always used the proper gauge ie 12 or 14 speaker cable.
I finally upgraded my rig last year and had a custom wired speakon cable made with 10 guage wire. Its wired differently on one end to plug into the bridged mono output on my power amp and then into my new SVT810E.
The cable has a printed shrinkwrapped label on one end that says "To Amp" so I dont mess up the connection. Very nice cable, was made custom by Rapco for me and only cost about 22 bucks Canadian. I was really impressed.
Its nice to have good cables for peace of mind.
The cable has a printed shrinkwrapped label on one end that says "To Amp" so I dont mess up the connection. Very nice cable, was made custom by Rapco for me and only cost about 22 bucks Canadian. I was really impressed.
Its nice to have good cables for peace of mind.
Winter 1/4 inchers are not as good in the summer as summer Speakons. In fact Speakons work better in Speakon jacks then they do in 1/4 inch jacks even in the fall or spring.
I bet members of the Speakon Brigade fly into a rage when they see someone plug a 1/4" into a Speakon.
they have XLRs with 1/4 holes in the middle
I think I saw an amp the other day with 1/4 in the middle of a speakon--can someone confirm?
I think I saw an amp the other day with 1/4 in the middle of a speakon--can someone confirm?
I know it's sacrilege and tough to hear from me but:
[Invalid or Expired Link Removed]
Another safety advantage- if you're running a high wattage stereo in the bridged mono mode you can end up with some serious power on the metal cover on a 1/4" cable. It can really give you a bite if you're not careful. Not so with a Speakon cable. Although you could use shrink tube over the metal cover.
Plus it locks, preventing some clown of a light guy from tripping over your cable and pulling it out of the cab.
Plus it locks, preventing some clown of a light guy from tripping over your cable and pulling it out of the cab.
+1 to KingOfAmps last post.
In fact IMHO Speakon® Combo is the part to use if You're making a mod to Your mono instrument amp. That way You have the both options should something go wrong during the gig.
IMO Neutrik is THE company when it comes to innovative connectors that don't cost an arm and a leg. I prefer using their products over any other brand.
Just my 0.02
Sam
Ps. Regarding the KingOfAmps post about the Speakon Brigade, You'll get good laughs when a close minded PA technician sees You doin' just that. Man they ARE CONFUSED
- Dec 18, 2000
- 13,201
- 340
- Disclosures
- greenboy designs: fEARful, bassic, dually, crazy88 etc
