Having thought long and hard about this range of basses, a process which those that know me will realise really hurt my head, I have decided on the following. Prices will stay as stated as long as possible but upward pressure on prices seems to be constant at the moment everything is going up at a frightening rate. It is possible to use cheaper hardware or skimp on the process and woods but I really don't see the point I want to produce a quality product and try to make something approaching a living at the same time.
As always thoughts/comments are welcome.
Graft Range specification.
Available in the following ACG body shapes.
Recurve.
J type.
Finn.
4 and 5 string basses in 33"/34"/35" scale basses.
Neck
Bolt on 24 fret Rosewood board zero radius alloy side dots.
3 piece Maple neck with dual action trussrod.
Asymmetric neck carve.
3+1 and 4+1 headstock design.
Body.
Ash without top.
Alder with selection of tops.
Currently available.
Bubinga
Walnut
Black Limba
White Limba
Figured Maple
Shedua
Spalt Beech
White Ash
Hardware.
Available in black or Chrome.
Hipshot Type B 19mm spacing on 4 string 18mm on 5 string.
Gotoh GB7 tuners.
ACG Custom Pickups with SB single coil or FB humbuckers. Single pickup version in 50mm wide housing dual pickup version in 25 or 50 mm wide housing.
Hipshot string tree.
Two options regarding electronics.
Single pickup version which will have an active East 2 band EQ.
Volume/Bass/Treble.
Dual pickup version will be passive. Volume/Tone/4 way rotary pickup selector.
Body finish
Grain textured MLF satin. (minimum lacquer finish)
Fusion gigbag.
Price point for both versions will be the same.
4 string £765.00
5 string £785.00
Hard Graft spec.
Same as above except.
Two pick version with East BTB two band active EQ.
Volume, Stacked bass/treble/pull bright, 4 way pickup selector.
4 string £850.00
5 string £870.00
Two pickup version with ACG EQ02 3K.
Volume/blend stack,Lowpass Filter stack, Treble Filter stack.
4 string £925.00
5 string £955.00
Options.
Dunlop Dual Design Straplocks plus £15.00
Hiscox hardcase plus £50.00.
Fretless Ebony board with or without lines plus £40.00.
Acrylic Impregnated Maple finger board plus £50.00
These basses will be built in batches which will be put up on the website and can be reserved with a £200 deposit. Orders will also be taken again with a £200 deposit securing a build slot. There are no further options available with regard to woods or hardware in the Graft range if you want additional options please contact with regard to a custom build.
As always thoughts/comments are welcome.
Graft Range specification.
Available in the following ACG body shapes.
Recurve.
J type.
Finn.
4 and 5 string basses in 33"/34"/35" scale basses.
Neck
Bolt on 24 fret Rosewood board zero radius alloy side dots.
3 piece Maple neck with dual action trussrod.
Asymmetric neck carve.
3+1 and 4+1 headstock design.
Body.
Ash without top.
Alder with selection of tops.
Currently available.
Bubinga
Walnut
Black Limba
White Limba
Figured Maple
Shedua
Spalt Beech
White Ash
Hardware.
Available in black or Chrome.
Hipshot Type B 19mm spacing on 4 string 18mm on 5 string.
Gotoh GB7 tuners.
ACG Custom Pickups with SB single coil or FB humbuckers. Single pickup version in 50mm wide housing dual pickup version in 25 or 50 mm wide housing.
Hipshot string tree.
Two options regarding electronics.
Single pickup version which will have an active East 2 band EQ.
Volume/Bass/Treble.
Dual pickup version will be passive. Volume/Tone/4 way rotary pickup selector.
Body finish
Grain textured MLF satin. (minimum lacquer finish)
Fusion gigbag.
Price point for both versions will be the same.
4 string £765.00
5 string £785.00
Hard Graft spec.
Same as above except.
Two pick version with East BTB two band active EQ.
Volume, Stacked bass/treble/pull bright, 4 way pickup selector.
4 string £850.00
5 string £870.00
Two pickup version with ACG EQ02 3K.
Volume/blend stack,Lowpass Filter stack, Treble Filter stack.
4 string £925.00
5 string £955.00
Options.
Dunlop Dual Design Straplocks plus £15.00
Hiscox hardcase plus £50.00.
Fretless Ebony board with or without lines plus £40.00.
Acrylic Impregnated Maple finger board plus £50.00
These basses will be built in batches which will be put up on the website and can be reserved with a £200 deposit. Orders will also be taken again with a £200 deposit securing a build slot. There are no further options available with regard to woods or hardware in the Graft range if you want additional options please contact with regard to a custom build.
