• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Fender BXR 300C

I just picked up a used Fender BXR 300C. It has one 15" in the cabinet, it's a combo but has jack out for second cab. I down loaded a copy of the owners manual but it didn't tell me the ohm rating of the factory speaker. The head is rated 300 watts at 4 ohms and I'm assuming it has an 8 ohm speaker from the factory so that you can run a second 8 ohm cab to get the 300 watts???? I need to confirm this before I try and find the right cabinet to add to this rig. Am I also right in assuming that it is only running 150 watts without a second cabinet. Some help on this subject would be greatly appreciated.:confused: :confused:
 
If its rated at 300 watts into 4 ohms and it has an 8 ohm speaker then its probably more like 200 watts. Not necessarily half of the wattage. Why dont you call Fender to find out for sure....
 
from [Invalid or Expired Link Removed]"About Fender Speakers

The following are the most commonly used Fender speakers. If you don't see your model listed....please call us! There are many other speakers available.....Please call us for current prices and delivery.

BXR Bass 15/150 #027577 150W 8 ohm Bass

Big time BXR Series bass speaker with 150 watts of booming low frequency power! A great replacement for older Bassman enclosures as well."

That part number I got out of the manual. The manual says the amp can tun ONLY down to 4ohms so you should get another 8 ohm speaker to be safe and avoid overheating the amp. if you want to maximize your loudness find a cab with the highest possible 'sensitivity' rating.



Invalid Link Removed]Here is the link to info above[/URL]
 
Originally posted by muddywaters
I just picked up a used Fender BXR 300C. It has one 15" in the cabinet, it's a combo but has jack out for second cab. I down loaded a copy of the owners manual but it didn't tell me the ohm rating of the factory speaker. The head is rated 300 watts at 4 ohms and I'm assuming it has an 8 ohm speaker from the factory so that you can run a second 8 ohm cab to get the 300 watts???? I need to confirm this before I try and find the right cabinet to add to this rig. Am I also right in assuming that it is only running 150 watts without a second cabinet. Some help on this subject would be greatly appreciated.:confused: :confused:
Yeah - it's an 8-ohm speaker (I have one - which I'd like to sell, actually). You can safely run a second 8-ohm speaker in parallel. I agree with another poster - the output with only one speaker (8 ohms total) is probably closer to 200 watts.
 
I had one of these a few years ago.It's an 8 ohm speaker like the other guys said.I used it in a classic rock band and it worked pretty well by itself.I had a 15" 8 ohm Peavey black widow ext.speaker I used with it for outside or large rooms.Not too bad an amp.
 
Haha...found this thread during a search for what the actual ohms are on my BXR300c so that I can add another cab......and yes ..nowhere in the manual does it say that the original speaker is 8 ohms......after reading this I believe that I have been running at 150w @8 0hms stock and if I add another 8 ohm 15"cab the amp will be running 300w @4ohms which is within spec for the amp........please correct me if I have it wrong.
It's a great combo...yes it's heavy, but it's made in the US of A which is rare these days........Many say that they are tonally challenged but I disagree....maybe if you slap and pluck a lot but I don't ......so with some tweeking I can get those nice Paul McCartney\ Allan Parsons kind of sounds that I like. I like to blend in with what's going on rather than dominate it. :) Anyway I have owned this amp since new......15 years or more and it's a rock.. (Literally :) ) Only ever had one input fixed in all that time ...and as far as I can see, the somewhat excessive weight equates to sturdy construction .........Not like a GK combo I tried the other day .........I tried to pick it up to test it for weight and nearly threw it over my shoulder..hardly encouraging! :)
 
No good to call FENDER, I'm retired now. The stock speaker is 8 Ohm, and true the amp makes about 200W in that trim. With a second cab and total impedance of 4 Ohm, we.re looking at 330W.

That power amp will unofficially do 520W at 2 Ohm, but may harmlessly thermal out if played hard.
 
Last edited: