Recent content by 61kalamazoo

  1. 6

    DIY 1x10

    Would 1.36ft3 be considered too small a box for the deltalite? WinISD suggests 2.1 Weight is the other factor. 'Doctors orders' not to lift over 40 pounds hence my latest rig: neo pak & 2 avatar sb 112's. I'm open to all suggestions. In retrospect, maybe I should have stated...
  2. 6

    DIY 1x10

    I need a small cab for practice & acoustic gigs. It will be powered with a Neo Pak...Not much on ebay or craigs list in the way of 1x10's. New cabs seem too pricey, so i'll just make one myself. What would be the ideal dimensions for the deltalite ll 2510 speaker? 3/4 plywood, shelf port...
  3. 6

    Avatar SB 112 vrs 212 neo sound differences

    Butch, My rig has evolved to two sb-112's & a Neo Pak. It's a flexible rig for folks that have fried backs... I use one cab for small venues and a stack for larger ones. Coupled, more bass & dB's and more wattage capabilities. Regarding tone, I replaced the foster horns with selenium...
  4. 6

    Choosing a new preamp tube!

    Telefunkens give me the best results...very articulate & open transparent tone. Harmonics are chimey too! When pushed, they break-up very evenly. In multi-stage preamps, I run GE 5751's in V2 with great results!
  5. 6

    Neo-Pak 3.5 dB gain @ 2ohms?

    I have a neo-pak 3.5 w/ two 8 Ohm 1x12 cabs rated at 100 sensitivity for a total of 4ohms. How much more head room and volume would I gain if I had GB do the 2 ohm mod and run two 4 ohm versions of the same speakers? SK
  6. 6

    Genz Benz Preamp settings

    Smidge, I'm running two 1x12 neo cabs w/ a Neopak 3.5. The Deltalites have a 6 dB response peak at 2-2.5 Hz... so I use the parametric mid set at 2k and cut the mids by 6-10 dB at that mid-octave point. I like a flat set up at the amp and shape the tone w/ the Tonestyler pot's on my bass.
See more
Top Bottom
Back