Recent content by fader_jockey

Any of the Guage Mics would be great. I've used them all. Own several. http://www.gauge-usa.com/Gauge_Microphones/Home.html One of my favorites for VOX depending on the vocalist of corse is the AKG414. At4050's are well worth their weight. I've used them on everything from drum overheads to...

bump

I'm looking to match another cab to my berg HD112. The reason I'm not going with another killer sounding 112 is that I've noticed in some rooms the my AE410 tends to sound better and our sound engineer tends to want to mic one of the 10's. Recording wise they both do extremely well, but I tend...

Ok great, I really appreciate it. Ill give it a try and post back!

Yes, its posted somewhere on this thread ^^, used the same settings with my D610XST, didn't have any issues out of the 610, however that cab is in the shop for an unrelated issue with Eden. How do I go about testing to see if one of the voice coils is fried?

You could be right, I haven't thought about over driving the input. I'm setting the gain how you would set gain on a mixer or really anything. I don't think its the EQ. I switched cabs with the same EQ, no fuzzy noise from it and sounds exactly as I want. But I do really appreciate all...

Other than resetting the gain structure after changing cabs, both my WT800 and WT300 when ran through my D610XST. There was no issue. My issue is the large amount fuzz, almost distorted, sound when Im play in the lowest of registers on my 5 string

I'm sorry I imagine this is frustrating.... I apologize. I've been on my own with music for ever and always had the attitude of I'm gonna do my best to figure it out on my own, and thus far has been very rewarding. so why the sigh? However, I have the gain structure set as Eden instructs...

Yes, I played my FJ4 through it and his Fender 5 at the time. I figured it was one or the other; yes its an OSP speaker cable, when I switch to my WT800 I used my speakon connection. Both amps have been through my local service shop and should have no issues with signal path.

A friend of mine that plays for a singer/songwriter out of Nashville has the 210/112 set up, it seemed to have everything I wanted/need out of my sound. I guess I just fell in love with the tone. I love the tone and punchy nature of my 410. My signal chain is clean. I made it super simple to...

Ultimately I would like to get a HD210 and HD112, but I came across this AE410 for way to cheap to pass up.

KJ, I appreciate the prompt responses. According to the specs the cab can only handle 44-15k with out loss. My problem enters here. I know that cab will handle and should handle all that have. I've rotated my WT800 through it to see if I was having an output problem. Same thing. I may just be...

Howdy guys! I'm in desperate need of a 112 cab to add to my Bergantino AE410. My dilemma: with this cab I'm running my 99' Fender deluxe 5 jazz and my FJ4 Modulus set up for BEAD through a WT300. The cab just doesn't have it for the low end (below 44Hz) and the loss in db sucks. Bottom...

Im in clemson and am very interested in the cab. How can I contact you?