Recent content by Heyman

Thats how I had it a couple of years ago when using a Mesa Strategy 400 as main amp. The two channels on the Strategy was really great pairing different cabs. I've heard the combination of theese cabs together with an M9 head and I really think it sounded great. The M9 is though able to run...

Doesn't it depend on the elements? Right now the 2x10 can deal with 400 watts which should mean that each element can deal with 200 watts, I have a 200 watt head and is never even close to full throttle. My intention is also to put the 2x15 first in series and there I got elements that can take...

I'm currently using a Mesa RR 2x15 cab from the old series and have been pretty satisfied with it. Today I came over a 2x10" in the same series. I've been thinking about getting one for some time and the thing that have stopped me is the impedance matching problem. The 2x15 is 4 Ohms and the...

What does it look like beneath the pick guard an truss rod cover? Is it that red "easy come of paint" there too?

One small error in the first pic is adjusted now!

OK I have done some messureing and I hope you get my illustrations. First of all I have to say that all specifications are inside messures. The Plywood is 20 mm which are aprox 0.8" [Invalid or Expired Link Removed] For another illustration I also stripped down the box and shot some...

Ok! I'll try to go the the rehersalplace lateron today and do some messureing. The dimensions I gave earlier are the inside dimensions. I'll compliment with as much as I can...

Just has to BUMP this cause I still want some more answers...:( Need tip for good replacement elements instead of the Cerwin VEga AC 188L...

Dont really get the FB value. what does it actually mean? I just found a formula that said Fb=(0,42*Fs*Qts-0,9) and if that is correct the only thing I actually put in the program is the volume of the cabinet nothing that depends on how big och long the opening is. Every speaker model has a...

Ok! You really give me alot of great information I'll try the calculationprogram and see what I can figure out. Yes is't like a shelf above the port. I realize that different brands gives me alot to shose from but which brands shall I give energy to look up? I've just heard that Eminence is...

yes I've heard about the messurement issue, and tnx alot for explaining the thing with reconing. I dont know anything about the Thiele-small parameters. I've just read alot of diagrams and specifikations of the Eminence speakers EMINENCE SIGMA PRO-18 EMINENCE OMEGA PRO-18 EMINENCE KILOMAX PRO...

I did a messure with my multimeter today and got a value between 2,4 and 2,5 Ohms... and also found http://cgi.ebay.com/Cerwin-Vega-18-inch-AC188L-Woofer-Subwoofer-Speaker_W0QQitemZ260166566541QQihZ016QQcategoryZ23794QQcmdZViewItem which confuses me even more....

To bad!!! I will messure it with my multimeter today but as I recall 3,2 sounds familiar. You mean that it could actually be a 3,2 Ohm speaker? Is there some good substitute for this??? Is any of Eminence Kilomax??? Eminence Sigma or Eminence Omega? a good substitution or does anyone...

I've got a 18" Cerwin Vega element in my sub and it has been very great. The issue is that I've bought a full tube head and just to be sure I did check the impedans of the speaker and it is a bit weird...Either it says 3 Ohms or maby it is just a bad punched 8... Heres the label [Invalid or...