Recent content by Play that Fish

Thank you! I did have it professionally set up and it came out great. I thought that the nut needed to be filed down a bit (it's brass) and I didn't want to mess with that.

In my case, possibly it's the crappy design which makes the boxes really difficult to open and which puts strain on the flimsy box.

Here are some pics of the NS2 during and after...

I'm getting a free one so I'll put that in- I'll be more careful and see what happens!

I'd much rather this!!

I don't even know how to get the battery box open well. The end where you're supposed to put your fingernail in is so flimsy it broke.

Battery box contact with what? Yep that was it thanks! Getting a new battery box in the mail soon.

Yep, it really happened. Plugged it in after about a month(working on my recently acquired Spector NS2) and nothing. No sound. New batteries and cord/amp check still nothing. I called MM and they said it is likely the battery box or the jack. They are sending me these first to try. Anyone...

I can get to the posts but there isn't any "post new thread button". I am signed in . Any suggestions? Sorry!

Yep, but not really sure I get it from what you sent- the translation is not so good. I think it's saying that if you pluck the string between the bridge and adjustment block and it vibrates, change the angle?

Hi there, I just got an NS2 and am going through it. It's coming out great. I didn't know how the bridge worked until I found the allen screw on the side of the bridge. I was perplexed but now get it. Anyway, I have the truss rod adjusted and need to get the string height adjusted. Each...

So no problem polishing the fretboard lightly with the steel wool? I've always avoided that.

The nut at the headstock is quite tarnished/corroded. I was thinking of pulling out the Dremel for that. I'm sure I probably have something in my kit to polish it up. I have found that Simichrome is the best metal polish I have ever used, maybe I'll start with that first.

Totally OK with taking it apart. I'll send pics!

I was planning on using tape on the frets, typically I use painters tape. Seems to work well. Thanks for the warning about the steel wool, I did know about that problem and will cover the pick ups with tape too. Still wondering if it will affect the value of I do these things?