Recent content by SSBASSCASE

I believe I have one of these.

Im Going back to my hartke ha3500. Maybe get a 7000.....

I was using each channel independently. Goliath 4x10 one 1 and bog ben 1×18 on 2. Are you siggesting i daisy chain the tqo cans on a single channel ?

How did the replacement work out for you? I just did a p m replacement on 00C and its cutting out less than 30 min into a set.

I use a Goliath iii with a Big Ben. It is a good combo. Sounds boomy while still cutting theough tonally. Only drawback to the Big Ben is in the name. Its big and you will need room in your rig for it. But overall its good.

I use a Goliath iii with a Big Ben. It is a good combo.

I just did a main board replacement on one. Picked up the board from Full Compass. I got the svt-7 for free from a buddy who didnt want to fix it himself. His loss my gain. A New main board cost me about $250 and can be easily swapped if you have any basic understanding of a screwdriver... Ill...

Not sure if anybody made a similar comment yet but here it goes anyways. Anytime you have drop off of sound from your power head check the pots first. The heads are shaken to thier limits if used regularly and if you have a loose pot it will cuase cutout issue's. I learned this with my Hartke...

Ill see how they turn out on the Explorer.

They do hold up pretty well. They are punchy when you want them to be and have a good tone for flats. So far they have held up well. I put a set on in June have done about 6 gigs and twice a week rehearsals and am just now considering putting on a fresh set if any tone had been lost Ill know...

I just bought a set on a whim because the local music shop was out of the Dunlop stainless flats I usually use. I like the bright tone but do not like how these strings feel. They seem to feel a bit like a micro cheese grater. I bit rough on my fingertips with a little too much grab. The steing...