15/6/1 build

[mcapote]

fellow Tber friend asked me to build him a fearful 15/6/1. pretty much spec build except it has a 3rd handle on the top.

cutting the birch out
Link Removed

my trusty table saw
Link Removed

she did some cutting for me
Link Removed

she cuts pretty good
Link Removed

testing the holes and drill out out for the hurricane nuts
Link Removed

gluing together
Link Removed

started putting bracing
Link Removed

bracing in front on and drying
Link Removed

will put more pics after the front dries and I start putting more. ran out of braces so thats were im leaving off for the night.

 

[trevcda]

Is that 6" in the same space as the 15"?

 

[mcapote]

no its boxed in just dont have the top on so your seeing the light, that first pic the small cuts are the box for the 6

 

[Ncognito]

Looking good mcapote! Thanks for doing it. I can't wait to take it for a ride!!!!!!!!!!

 

[Ncognito]

I'm crazy! I bought a Genz Benz Streamliner 900 to try with this cabinet. I doubt I will like it better than my Ampeg SVT-4 Pro, but everyone has been raving about the Genz so let's see!

 

[svtb15]

Sub'd

 

[mcapote]

today - thursday im working 7am - 10pm so no updates until friday when o got home @ 5pm got to buy some sandpaper for my sander to clean up the edges were the wood joined and fill any gaps for a nice duratex coating. also still need to roundover everything.

 

[Ncognito]

Hope the weekend was productive! Can't wait to give this baby a try. No luck getting my 12/6/1 crossover fixed.

 

[Ncognito]

Well, I used my fEARful 12/6/1 for 2 gigs this past weekend. What a great box! I've been an Eden 410XLT user for 16 years, so for me to like something, it has some strong competition. While the fEARful 12/6/1 won't be suitable for all of my gigs, it will be doing quite a few!

If you are a funk/slap/pop guy, theses cabinets are the best I've ever player through and have a look at my profile, I've owned a few!

 

[mcapote]

every frigging time i go to work on the box it starts raining. got some more done but its raining again so cant finish cutting the grill anyways triple handles as requested.
Link Removed
Link Removed
Link Removed
Link Removed
Link Removed

 

[greenboy]

Get my email from your band site, mcapote? : }}

 

[Ncognito]

That looks terrific mcapote!!! The 12/6/1 is a little light for some of my shows, so this should be the ticket!!!!

 

[mcapote]

Get my email from your band site, mcapote? : }}

just checked it now, we lost our singer recently so i havent checked the site email since we arent booking shows.

That looks terrific mcapote!!! The 12/6/1 is a little light for some of my shows, so this should be the ticket!!!!

yeah hoping i can finish it soon, damn rain keeps killing my outside work time. trying to get the grill cut today between rains, so hopefully if i get it cut then its just putting the batting, and wiring everything up. hopefully lelands crossovers work plug an play

 

[Sundogue]

hopefully lelands crossovers work plug an play

Yes, the pre-built ones are pretty much plug and play.

 

[gmarcus]

Looks good, but why are the handles so close to the back? Seems like it won't balance well.

 

[mcapote]

Looks good, but why are the handles so close to the back? Seems like it won't balance well.

between the bracing, actually makes it pretty easy to carry for me. though i think he will end up using the top one more than the sides

 

[mcapote]

Yes, the pre-built ones are pretty much plug and play.

may have spoken too soon. something aint working right, but im too tired to figure it out tonight. I went to plug the box in and my amp went into protect and I only heard sound out of the woofer not the mid or tweeter. gonna have to see if its a driver or xover problem when i aint tired.

 

[Bill Whitehurst]

Check your wiring to and from the crossovers.

 

[mcapote]

yeah i checked it twice while wiring it up and a 3rd time before screwing the woofer in, but i plan on checking everything again when I have a day off from work. Got the check the wiring then i will remove the tweeter and mid ends and try running it just woofer, then add the mid section, etc until i figure out what is wrong. guess i'll break out the multimeter to check the drivers again too.

 

[washburn_it]

I've once got a speakon socket defective, one of the 4 contacts was not working (1+) so the woofer was working but not the midrange.
I replaced it and everything worked out.

Regards,

Roberto