A DI with a Parallel Out that isn't on the right side

[secondbestcody]

I have the Darkglass X Ultra. 1/4” input/outputs are on top, output on left corner and XLR out on left side along with cab sim on/off.

 

[Derek Williams]

I have the Darkglass X Ultra. 1/4” input/outputs are on top, output on left corner and XLR out on left side along with cab sim on/off.

It's only the X7 that has a parallel out, and it's on the right side.

 

[Michael Favata]

EBS MicroBass 3 2-channel Preamp
???

 

[TinyE]

You can always turn the pedal aroundView attachment 4695929 .

man i was going to say the para driver too... best DI i ever used. but the clean out is on the right...errr...wrong side!

 

[Naack]

You may want to look at the Pinstripe LWDI.
It is specifically designed for compact pedalboard use.
Just my $.02 as always.

I have one and can confirm, it's awesome.

 

[Stranger Danger]

Walrus Audio Canvas?

 

[mike buzzetti]

Donkeycracker cheesecake ultra XT1176LNIII , new unit .

 

[FronTowardEnemy]

The @Sushi Box FX Finally Tube DI has the 1/4 in & out on top, the out is switchable with the xlr on the side and it uses the Lightning Boy transformer.

Finally – Sushi Box FX

This.

I use it exactly how you described. It’s really a great small board DI.

 

[Russ Frost]

MXR M81 bass preamp. Small form factor and both parallel and DI both on the left.
MXR® BASS PREAMP

 

[TonyP-]

It doesn’t have a parallel (clean) output.

Which blows me away that it doesn’t...

Mo parallel out is a deal breaker for me.

Sushibox is developing a new one with one.

 

[fishdude101101]

The Mesa Subway Plus DI is set up exactly how you want. The "tuner output" on the left is an unaffected signal.
MESA/Boogie®

You can also set the preamp out which has both xlr and 1/4 to pre-eq. the other di will be post always.

 

[DaveParker39]

MXR M81 bass preamp. Small form factor and both parallel and DI both on the left.
MXR® BASS PREAMP

This was the one leading the pack for me when I Started thinking of this. The only thing is that if you turn it on, the 1/4" is NOT bypassed... it is colored by the preamp. I confirmed that with Dunlop on Tech Support this morning. But I may be more willing to make that compromise.

 

[devnulljp]

 

[Fortyweight]

What I have done in the past with a BDDI is use a patch cable and this: https://www.thomann.de/be/the_sssnake_1802_adapter.htm?ref=prp_dyk_alt_1

attach it with a cable tie binder on/under your pedalboard and you’re good to go.

 

[Jett Litt]

I typically use something like this.

https://www.amazon.com/Seadream-2Pa...+female+right+angle,aps,223&sr=8-6&th=1&psc=1

Or this

https://www.amazon.com/Ancable-2-Pa...1/4+male+to+female+right+angle,aps,223&sr=8-5

 

[cheapbasslovin]

Jig Man has a decent solution. I was going to suggest making or buying a patch bay. I did this on a board I used not too long ago because access to the XLR and the 1/4 out was stupid.

I cut off that Hosa cable and soldered on a 1/4" jack onto the end of it and threaded it into the top of my board. You could also just use a 1590LB and 2 1/4 inch jacks.