SOLD Acoustic Image Focus Series III

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by jharms80439, May 4, 2019.

  1. Price:
    Up for sale is my Acoustic Image Focus 2R Series III. Bought it used a few months back and now I'm using a wireless system and a small tube amp for small settings. This one is now extra and needs a good home.

    Everything works as it should and the amp has the transparency that Acoustic Image (AI) is known for. The amp can do transparent low power gigs too, but it has the power in reserve to hammer when you want to do that too.

    All the features and functionality of the Clarus 2R, but twice the power: 1000 watts into 2 ohms, 800 into 4 ohms, and 450 into 8 ohms--with studio-grade digital reverb, delay, chorus and flange built in.

    Two completely independent channels can each accept either standard instrument cable or XLRs connector. Built-in phantom power for both channels.

    Both channels have its own variable HPF (high pass filter) or notch filter to tame feedback frequencies.

    Amp comes with the AI Focus bag. I will pack it well and ship in a new shipping box.

    Price is shipped, payment is via PayPal.

    Specs (from manual for both Clarus and FOCUS):

    115V/60 Hz or 230V/50 Hz, switchable
    Size:10x8x3.5 inches
    Weight: 4.8 lbs
    Mic Input: 600 ohm balanced, XLR connector
    (Phantom Power: 38 volts, on/off switch w/LED indicator)
    Instrument Input: 1 M impedance, 1/4 inch jack
    Direct Out: +4 dB, balanced, XLR connector, ground lift, pre/post EQ selector
    Effects Loop: Parallel type with return level control
    Bass Control: Shelving type, ±15 dB at 60 Hz
    Mid Control: ±15 dB at 650 Hz
    Treble Control: Shelving type, ±25 dB at 10 kHz
    Notch Filter: >-18 dB sweepable from 30 to 800 Hz
    Low Cut (a/k/a High Pass) Filter: -12 dB/octave sweepable from 30 to 800 H

    Power Amp
    Topology - Class D (PWM)
    Switching Frequency - 230 kHz
    Output Power (Focus) - >450W @ 8 ohms, >800 W @ 4ohms, >1000W @ 2ohms
    Minimum Load - 2 ohms

    Thanks for looking!


    IMG_3698.jpg IMG_3699.jpg IMG_3696.jpg
  2. Sale is in the works.

  3. BassikBrad

    BassikBrad Bass Face Brad the Spector Respecter Supporting Member Commercial User

    Mar 28, 2018
    New Mexico
    Endorsement: Mozztronics. Lusithand
    GLWTS Bassbud, that looks more complicated than my 300 Pro, I would need a pilots license to operate that !
    jharms80439 likes this.