Ampeg V4B 212AV+210AV (2.67ohms)

Discussion in 'Amps and Cabs [BG]' started by uncle woody, Jun 5, 2019.

  1. uncle woody

    uncle woody

    Dec 7, 2008

    Attached Files:

  2. beans-on-toast


    Aug 7, 2008
    I would use the 2 ohm tap.

    Do not mix the taps on the amp. Do not connect the 8 ohm cab to the 8 ohm tap and the 4 ohm tap to the 4 ohm cab at the same time.
  3. JimmyM

    JimmyM Supporting Member

    Apr 11, 2005
    Apopka, FL
    Endorsing: Yamaha, Ampeg, Line 6, EMG
    Agreed with both of these, especially not mixing the taps.
    rzero, AstroSonic and beans-on-toast like this.
  4. BassmanPaul

    BassmanPaul Inactive

    I have to admit I would have said use the 4Ω tap as tube amps run better into a load lower than the tap rather than higher. :)