• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Anyone else got a Maxon BD-10 Hybrid Bass Driver?

OzzyGreg

OzzyGreg

Jun 7, 2008
1,488
471
Illawarra, NSW, Australia
www.tz350.com
#1
.
I ordered a new Maxon BD-10 after viewing this Youtube video:



It arrived yesterday and I had time for a brief try out here at home.
It's pretty impressive! The separate Clean and Drive level controls give a lot of scope for blending. I also like the Low and High EQ being adjustable.

I'll reserve my final opinion until:
a) I've had a chance to try it out in a band context
and
b) My new Hooker's Green Bass Machine pedal arrives and I've tried that out too

but for now this Maxon pedal is looking/sounding pretty damn good!
I particularly like it from about 5.30 in the above video.
 
  • Like
Reactions: BackToTheGroove
#4
.
I'm surprised these haven't taken off. They really are an awesome, versatile dirt pedal!

Saying that, I haven't been using mine much at all because there's no room on my pedal board for it. I like stuff to be tidy, so I'm reluctant to sit it outside connected by cables.

I use the Hooker's Green Bass machine for "always on" overdrive and the Big Muff Deluxe when I want real dirt.
Both of them have a permanent place on my board.

Maybe I'll make a bigger pedal board. Maybe I'll end up selling pedals I don't use too! :rolleyes:
There's a few of them laying around now.
 
#5
2015 was a long time ago.... but...
Hi. I'm on the Hunt for the OD Unicorn, and looking at buying this BD-10 after seeing the same demo above, and from what the Wetter Bass guy had to say about a previous Maxon OD and how much he was looking forward to trying this new BD-10. A Pork Loin is also on my list because its a stalwart and it has all that adjustability to suit whatever the player needs, with the three internal pots... For my bass overdrive needs I want a warm tube snarl mostly, then into a growl with digging in when needed.

A separate clean blend is important for the control I want. In my bands, I probably would not need full metal jacket levels - but they are a shitload of fun to try out creatively and see where things can go.

So whatever you can tell me about the BD-10 experience would be great. Thanks
 
#8
Okay - just took the Maxon Hybrid Bass Driver home and put it through its paces. First impression was, “wow, this thing sounds pretty dang good, it holds the bass frequencies well…”
Second impression, “hmmm… there’s no master volume, there is clean level and drive level… but no summed volume.”
So, regardless of what I think of it, I must either set it at soundcheck and not touch it (which can be fine), or get the level of distortion/drive that I want, and use something downstream to bring the volume back down.

Unity on the clean level knob seems to be around 1:00, and on the driven level as well, provided the Drive control (separate from the drive level control) is not above noon or so. That “primal growl” (my term) at the attack of a note is achievable, but the output level of the pedal is so much higher than the signal before the pedal is engaged that I’m not sure how to manage it without reducing the volume downstream. There’s the bad stuff.

THE GOOD STUFF: If you are willing to use this as a single sound pedal, meaning you don’t vary the settings widely during your set, then you have a controllable 808 circuit with a treble drive control, a bass drive control, AND a clean blend. I did not find that the character of the distortion changed that much with varied settings on the bass and treble controls, but that is a strength for this pedal. Did the pedal ever really shine? Yes.
When I used this pedal to drive an octave pedal (a Boss OC-5 in polyphonic mode) it really turned the Boss from what I expected to be a synthy sort of thing into a doomy, angry symphonic sort of thing. When I added a chorus after the octave - a little EHX Bass Clone - it became positively EPIC. And it’s to do with the controllable, even-handed output from the Maxon, even at near-pegged drive levels.
For me, alone, the Maxon is too fuzzy to be a good low-gain drive. At highest, extreme settings it surpasses fuzz and goes buzzy. But for a soft clipping 808, at all points in between, it is an imminently controllable, well behaved, overdrive distortion unit that should be considered upstream of octaving and modulating pedals. I have an MBD v3 coming to try out for my pedalboard next.
 

Latest posts

Top Bottom
Back