so ordered one of there babies and it arrived in 3 days from order and was is good condition and sounded great except that i noticed that sound was only coming out of the two left speakers. i hope i didnt get a defective one. anybody got any info or experience on this problem? thanks
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
avatar 410neo 4ohms question
- Thread starter DubBassfunk
- Start date
I've been inside my B212s and the wiring is solid, including the speaker-terminal clips. Still, it'd be wise to pull the rear plate, get in there with a flashlight, and see what's going on. Should be obvious, as in maybe a wire connecting one speaker's (+) to its neighbor's (-) fell off (or is missing). If it's missing, check around the bottom of the cab. It's a five-minute job max. The plate screws come out easy with a hand screwdriver -- no power driver needed.
The avatar 410 4 ohm uses 16ohm speakers all wired in parrallel. there are 2 sets of wires coming from the crossover, one going to each bank of 2 speakers which are connected to each other so i would assume the one set of wires going to the side that isnt working has become disconnected.
