Had an issue a few weeks ago with Barefoot pedal buttons on my Bluetooth page turner. The button had worked its way lower on the switch to the point where I could no longer engage that switch. Fortunately it was the second to last song, no worries.
My suggestion is to put the button on loosely and make sure it engages the switch before you tighten the locking screws. If it doesn’t, I picked up a set of washers on Amazon that had small washers, used those to limit the depth of the Barefoot button, made sure it works and then tighten the locking screws. Now it won’t budge.
My suggestion is to put the button on loosely and make sure it engages the switch before you tighten the locking screws. If it doesn’t, I picked up a set of washers on Amazon that had small washers, used those to limit the depth of the Barefoot button, made sure it works and then tighten the locking screws. Now it won’t budge.
