• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Bass and headphones

This? Here:

I'd try any cheap wired headphones you might have lying around. Inexpensive headphone amps have issues driving studio headphones that require more power or have higher impedance.

Given your newly stated grim financial condition I cannot recommend spending a single penny on musical gear at this time. You said you have no money, a broken laptop, a past-due phone bill, you "can't manage my money very well" and have "no budget to speak of".

Friend, you're setting off more red flags than a May Day parade. Put this idea away for now and tend to setting straight your life. Best of luck. ☮️
 
Nothing at all wrong with the Mustang Micro. I use one with good headphones and it can get the sound you are looking for. Try the following:

1. Use Preset 56: "DI Funk"
2. Press the EQ button on the side of the unit until you hit EQ 9.
3. Profit
 
One thing to mention is that you don’t want headphones which are particularly bass heavy, otherwise you’ll really compromise the sound. Especially when playing along with music, you need something more neutral, with a wide sound stage so that everything is spaced out and not congested. Comparing headphones on my headphone rig at home, the difference is really obvious. So just because you play bass, DONT get bass heavy headphones.
 
  • Like
Reactions: Uzziel
You need a dirt cheap solution with what you got, I hear you.

Here's where to start:
Check your local classifieds for a small mixer. Behringer Xenyx series or comparable. Make sure it has a headphone out and a three band EQ on at least one channel. Something like this goes second hand for about $20. This will give you simple means of EQ plus a headphone out that will drive your AKG cans properly, and it should already feel like a step up, since now you can actively boost the bass, making up for the not-optimal response of your headphones.

Next would be software. Try and see if you can get the Neural Amp Modeler software running on your laptop. It's free.
The Valeton GP-5 pedal retails for around $80 and it's able to run NAM profiles.
You set up your sounds in the software, transfer the files to the pedal, and you'll have tones for days, way better than they have any right to be at that price point.
That's what I'd do if I had to build a home rig with the tightest budget.
 
  • Like
Reactions: Uzziel
Nothing at all wrong with the Mustang Micro. I use one with good headphones and it can get the sound you are looking for. Try the following:

1. Use Preset 56: "DI Funk"
2. Press the EQ button on the side of the unit until you hit EQ 9.
3. Profit
I don't even know what a preset is. Is it the one called "amp" ? Do you know where I can find a manual or something? I think my strings are the best for deep Bass without any amplifier ? I do know what EQ is but I don't know what EQ 9 is. Do you just click it 9 times? This is my favorite reply BTW. What's "profit"?
 
One thing to mention is that you don’t want headphones which are particularly bass heavy, otherwise you’ll really compromise the sound. Especially when playing along with music, you need something more neutral, with a wide sound stage so that everything is spaced out and not congested. Comparing headphones on my headphone rig at home, the difference is really obvious. So just because you play bass, DONT get bass heavy headphones.
Thanks the AKG 240 headphones don't seem to be "bass heavy.
 
  • Like
Reactions: Nuage420 and ped
It’s not battery powered, but the TC Electronic Bam 200 makes a great headphone amp, as well as a nice amp for small gigs (with the addition of a small speaker cabinet). Currently $119 at Guitar Center.
Cool maybe I will try to save up a couple of months and... Oh yeah, I can test it out in Guitar Center store... See if I love it
 
Last edited:
My mustang Micro headphone amplifier is different from the manual. Red circles show my micro button is labeled "modify" and the "F" in the manual with the FX level button
IMG_20250914_123326935~2.jpg
and. and then here is the manual



Screenshot_20250914-123533.PDF Reader~2.jpg
 
Last edited:
Have you considered an audio interface that you can also run (and power) through your computer? There are Focusrite Scarlett Solos on Reverb for $70. If you go that route, you’ll have access to a ton of plugins that will allow you all sorts of tone manipulation. There’s definitely a learning curve, but it’s absolutely worth it. I play at home almost exclusively through an interface and headphones.
I have a interface thing but my computer USB doesn't work anymore and I don't have any way of fixing it until I get it back from my current caregiver so that my aunt can tell my cousin how to fix it.
 
I need help but I don't know where to look.

View attachment 7321886

I got the "banner" looking good. With this picture though
I see I didn't tell you what I was having trouble with. I'm trying to get this picture on a avatar thing or whatever it's called where you have a little picture next to your name. I got the banner working but it's not what I want. Sorry I wasn't saying what I need to say. Sometimes I get that way and think I wrote something but I didn't. It's all part of having amnesia.
 
Long forgotten Glarry GB-20 Bass amplifier. Took it out of the closet and decided to see if I can play anything with it and have it sound any good at all. Aside from some humming I think it's okay.

 
Last edited: