Bass Cabinet to Combo amp

[JamesMichael]

I have a WorkingMans Swr 15 combo amp that can support another cab thats 200 watts in addition to the 160watt 1x15 that's built in. My question is, is this cab compatible? Invalid Link Removed

Its a 250 watt with 8ohms independence, the head says it can support up to 200 watts at 8ohms. Is it safe to use this cab with the head on my combo?

 

[srxplayer]

That is an 8 ohm cabinet. It's probably fine. Just check the output of your amp see if it says 8 ohm or 4 ohm minimum. I used to have that same amp but I don't remember what it required to get the full 200 watts. Most likely its 8 ohm.

 

[B-string]

I have a WorkingMans Swr 15 combo amp that can support another cab thats 200 watts in addition to the 160watt 1x15 that's built in. My question is, is this cab compatible? Invalid Link Removed

Its a the head says it can support up to 200 watt250 watt with 8ohms independence,s at 8ohms. Is it safe to use this cab with the head on my combo?

The cabs max input wattage (250 in this case) means that is the most power FROM the amp head you can send it. Your amp head supplies the "power" in watts not the speaker cab.
So your amp with a 4 ohm impedance load (internal speaker plus 8 ohm external cab) will output 200 watts. Your amp and external cab should be very happy working together.