1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

bracing in 1/2 cab

Discussion in 'Amps, Mics & Pickups [DB]' started by vilgo, Mar 29, 2009.

  1. vilgo


    Mar 21, 2004
    hi everyone

    i read about the 1/2 diy cab but couldn't pix of what kind of bracing (and how much) you guys have used

    any chance of some inside cabs if you have them handy
    that would help a lot
  2. Greg Clinkingbeard

    Greg Clinkingbeard

    Apr 4, 2005
    Kansas City area
    KC Strings

    I presume you are talking about this:

    Based on this:

    Sorry, but I didn't take any pics of the insides and since the driver is permanently sealed to the baffle, I can't take any for you.

    I built mine out of 1/2" birch plywood and used a single 1" vertical brace centered on the back. It is simply put together with titebond glue and 18 gauge 1-1/4" brads.
    There are 1" strips glued to the inside to which the baffle is attached.
    Damping material is:

    All of the parts also came from bltsound.

    I also loosely packed it with poly fiber from the hobby store.

    Feel free to PM also.

    Good luck.:D

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.