Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Double Bass Bridge clamp
- Thread starter Boppingtheory
- Start date
You can make them yourself. Get a piece of thin steel that you can bend on your workbench, bend both sides and then drill the hole in the middle. You might need to use a plier or hammer to get the bending over 90 degrees and do that before you drill the hole.
You might test that with Aluminium first (thicker than steel but not too thick, because it might break).
Don‘t forget to smooth the edges (probably before and again after bending and drilling).
You might test that with Aluminium first (thicker than steel but not too thick, because it might break).
Don‘t forget to smooth the edges (probably before and again after bending and drilling).
