Broken Boss Pedal

[peavey09]

Hi, i have some how fried my CEB-3 Bass Chours pedal.... anyone know how i can get it fixed or sent back to Roland?

Btw i am running it on a 9V boss adapter which i run all my pedals off.

Thanks

 

[NortyFiner]

http://www.bossus.com/support/ should have what you need...look down under "Service and Repair".

 

[stflbn]

Honestly, in the end it might be just as cheap to buy another used CEB-3 after shipping, repair, etc.

Unless of course the one you have is under warranty.

 

[wetzelman1]

i fried a pedal when I plugged the wrong power supply into it. The boss boards usually have a safety diode that will blow first and save the rest of the board. try looking up the schematics and u can either replace the diode or just remove it altogether, just don't plug the wrong supply in again or it's really toast. Mine works fine again.

 

[Downlowd]

Welcome to TB. Fill out your profile so we know where you are. I would say if you were in Houston TX I would take a look at it for you. You may find someone close to wherever you are that may help you. Best of Luck.

 

[peavey09]

Hi...i'm very very far from Houston!! I live in London and don't know of any repair shops near me (as i've never needed to use one!) any one know where there is one?

 

[peavey09]

i fried a pedal when I plugged the wrong power supply into it. The boss boards usually have a safety diode that will blow first and save the rest of the board. try looking up the schematics and u can either replace the diode or just remove it altogether, just don't plug the wrong supply in again or it's really toast. Mine works fine again.

you know where i can get a new diode?

 

[wetzelman1]

radioshack