• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Buzzin Avatar 210Neo!!!

This is my first post. :help: I recently purchased a Avatar 210 Neo. I have used it live three times. I was playin through the cab last night and noticed that there was a buzz comin from the drivers at lower freq. It sounds as if something is leaning on BOTH Drivers. I have placed both drivers in other combos to see if it is the Avatar box or the drivers. IT is the drivers. Could this be that the drivers are not broken in or could I be lucky enough to get two broken drivers? How many times can I type "Drivers"! Any help would be great. Thanks to all.:bassist:
 
i would email dave at avatar and ask him for his diagnosis. in my experiance that they dont buzz when there not broken in, theyre just not as full sounding.

btw i wouldnt mention to him that you took it apart and put them in another box, and then put them back. if someone said that to me the first thing id suggest is wiring problems
 
I had a Neo 210 that Buzzed at low frequencies when pushed a little, and the speakers themselves were creased causing the problem. I pushed them way too hard the night before with a Mesa 400+ and did them in. Just replace the speakers and have had no problems since.