BXR & RUMBLE help

[cyco739z]

I have a amatuer question, so please forgive me.
I have a BXR100 combo & a Rumble100 combo. Can I use the Rumble as a external speaker cab to the BXR useing the pre- amp send & return on both units? I'd like to use both cabs with the Rumble as slave. They are both 1x15. Thanks for any help.

 

[RickenBoogie]

No, you cannot connect the 2 amps as you have described. You CAN run them both in stereo, by using a stereo effects pedal, like a chorus. (or a buffered AB/Y box) Plug bass into pedal, use the left and right outputs on the pedal to connect to each amp in the normal fashion.

 

[cyco739z]

No, you cannot connect the 2 amps as you have described. You CAN run them both in stereo, by using a stereo effects pedal, like a chorus. (or a buffered AB/Y box) Plug bass into pedal, use the left and right outputs on the pedal to connect to each amp in the normal fashion.

Thanks.
I have a GT6 multi effects processor by boss that I use for compression, chorus, eq, etc. So I can use that. Now each side (left & right) will have seperate controls from each amp? Right?

 

[RickenBoogie]

Correct, so long as your Boss pedal has 2 outputs.

 

[cyco739z]

Correct, so long as your Boss pedal has 2 outputs.

It does. Thank gou for your help. I dont like hooking anything up blind.

 

[heynorm]

Line out one to the other.

 

[cyco739z]

Line out one to the other.

nope

 

[greengoblin]

The BXR has a preamp out as well as a power amp in... So you can chain them together without a/b boxes..

 

[cyco739z]

The BXR has a preamp out as well as a power amp in... So you can chain them together without a/b boxes..

that doesnt work.I tried it.