Cables for Yamaha EMX 521SC ?

[mello_bedwetter]

Anyone on here have a Yamaha EMX512SC? I'd like to know what speaker cables I need for the powered mixer. The only powered mixer I've had used the 1/4" phone jacks. I think the Yamaha uses the speak-on. I'm not sure what I need to look for. Are all of them the same or do some have different wiring or polarities? A link from Guitar Center or Musician's Friend would be helpful. Thanks for any input.

 

[uhdinator]

Invalid Link Removed

unless speaker cabs don't have speakon jacks the you need speakon to 1/4"

 

[mello_bedwetter]

Invalid Link Removed

unless speaker cabs don't have speakon jacks the you need speakon to 1/4"

Thanks...I'll have to get the Speakon to 1/4". I didn't know if the Yamaha had jacks for both.

 

[4Mal]

One of my bamds uses the EMX 512. I own an EMX 5000/12 mine has Speakon and 1/4 out. I believe the 512 has 1/4 out only though it's been a while since I looked at the back. Yamaha's manuals are on line too so you could download the manual and check there to be sure.

 

[Floyd Eye]

It has jacks for both. My cables are 1/4 to 1/4.

 

[mello_bedwetter]

Yea you're right. I just got it and it has the capability of using both. Thanks.

 

[mello_bedwetter]

I have a question on some speakers for the EMX512SC. Can I use two Kustom KCP215H speakers as mains? Running 2 of these on the "main" channel. They are rated at 4 ohms.
Buy Kustom KPC215H 2x15" PA Speaker Cabinet with Horn | Unpowered Cabinets | Musician's Friend
Thanks.
I'm not sure about the ohm/output.

 

[uhdinator]

No. Read the manual.