Carl Thompson Wiring Needed

[str3ck]

Hi Everyone,

I'm hoping someone here can help me out. I recently acquired a Carl Thompson 5 String semi-frills. Somewhere along its lifetime, someone has changed the wiring around from how Carl typically wires up his basses.

The typical way these are wired (when there are two pickups) is a single volume knob, and single tone knob, then a pickup selector switch and the on/off/treble cut switch.

Right now it has two volume knobs, a tone knob and the on/off/treble cut. I'd like to put it back to the original way. So if anyone can get me a picture or the wiring along with the pots and resistors used, that would be awesome.

Thanks in advance guys and gals, much appreciated.

 

[sikamikanico]

I was just looking at that recently here: I think I need to change my tone pots, but I need help! (pics)

Looks like 250K pots, no extra resistors, .047 uF cap for tone, 0.1 uF cap for the treble cut.

As is discussed in the thread, you can consider 500K pots if you want more highs, but just returning it stock should give you more highs (fewer pots).