• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

change string today but have a problem

I've bought a set of Rotosound Flats for £25 in UK which is around $50.

When i restring my bass i messup on my E string. I cut the wire really short by accident so when i start turning the peg the string holds its position and stay in tune but the metal part of the string is touching and twisting on the tuning peg. So i was wondering will it cause any problem to my bass. My other 3 string had put on fine with no problem.

So i either leave it or go buy a set of flat again but just putting the E string back on =.=
 
I've bought a set of Rotosound Flats for £25 in UK which is around $50.

When i restring my bass i messup on my E string. I cut the wire really short by accident so when i start turning the peg the string holds its position and stay in tune but the metal part of the string is touching and twisting on the tuning peg. So i was wondering will it cause any problem to my bass. My other 3 string had put on fine with no problem.

So i either leave it or go buy a set of flat again but just putting the E string back on =.=

Please upload a pic of this if possible, I think I know what you are asking but a pic would help to confirm