• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Combo, or not to Combo?

Yo! new to forum so hey!

im looking to upgrade my ampage!
atm im playing gigs for around 400-500 People most of the time and im torn between the decision to go for a Combo Amp or a Head + Cab

atm im using a Behringer Ultrabass BXL900 not the best but it does for what im doing atm seen as im always miced up and the tones i get out of it are decent!

however i did play a larger gig at the O2 academy which i obv had to arrange to use another bands bass equipment.

With my band i play mostly Death metal, Hard Rock and all that scene. but i also really enjoy playing funky stuff like Redhotchillis etc with them really amazing sounding slap&pops!

just wanted to see if any1 had any suggestions. i've been told Peavy and Ampeg are doing Quite well in the Heavy area but not 100%

and the option on if its going to be better going for a combo or Separate
 
Hey! I'm new to the forum myself.

I'm new to bass gear entirely in fact, so take what I say with a grain of salt (possibly the whole salt shaker, actually! lol).

If I were you, I'd stay away from Peavey. I haven't read so far a single positive comment on any of their models. From what I can gather, they're reliable amps, but the tones they deliver leave a lot to be desired.

Ampeg on the other hand seems to be well liked, though some of their models appear to weigh a ton and reliability is mixed. I see some people having issues while other people have absolutely none.

Again, from my extremely limited experience, I see combos being cheaper than head+cab, but more limiting. Plus, if there's a problem with either the amp or speaker, you're screwed. Think of it as being the same thing as those VCR+TV deals that you sometimes see. If one of the 2 items breaks, you need to bring the entire device to get fixed, so you're without *both* of those things. If you have a problem with either a head or cab, you can simply use another one with the still-functioning other piece of equipment.

Remember my disclaimers. :p

Hopefully, you'll get some solid info from much more experienced and knowledgeable members than I.
 
You are limited by the speakers in a combo amp. I just bought a Carvin that has a 400W amp and a single 15" driver. It's loud enough for my intended use as a stage monitor, but my 410 cab and 250W (stereo) head kicks its butt in the volume dept.

Definitely consider wattage in a combo. If it's driving a 4ohm speaker, make sure it'll go down to 2ohms in case you might want to add an extension cab.

Combo's are great for easy on / easy off. Just plop em down and plug in. They typically tilt back for use as a monitor.

A stack is more labor intensive to set up and tear down, but if you don't have PA support they are the only way to fly IMHO.