• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Controls preffered?

My latest bass has bass, mids, treble, pickup blend, volume.. and it has an EQ bypass switch but it lacks a passive tone control so I would likely only use it in a pinch. It has a mid frequency selector, but it's not in an easily accessed spot so it's pretty much a set and forget type of setting.

I would prefer a passive tone control and a mid frequency sweep knob, the former being not such a big deal as I utilize the preamp 99% of the time anyway.. the latter while it would be nice.. doesn't really stop me from enjoying the bass.

But really.. for me at least.. the only thing that's really dictated between an active or a passive instrument, is whether or not I'm EQ'ing at the amp or at the bass. I like having controls at the bass.. but that's not really the deciding factor as to how much I'll enjoy it.
 
I prefer:

- Master volume
- Pickup blend (if it's a two-pickup instrument)
- Tone control
- Stacked treble/bass (if there's an onboard preamp)

Yes, even if there's a preamp, I still love, love, LOVE having a tone control as you can do so much with it.

Hey everyone! Hope you all are good! i just wanna know whta do you preffer in a bass:
simple design like just a volumen Knob and you master your sound in another hardware?
or a eq, phase inverter, and tone control knobs in the bass? Thanks
 
  • Like
Reactions: Gilmourisgod
You need a multiple answers allowed poll. That said:

AT LEAST one of:
  • volume knob
  • kill switch
AT LEAST one of:
  • pickup selector (switch or pot style)
  • tone knob
  • eq knobs
Bonuses:
  • active passive toggle
  • boost toggle
Personal preference: volume knob, pickup selector switch, passive/active toggle, 3-4 band eq
 
I prefer a single volume knob. On my main bass, I have a MM pickup in the neck position and a J in the bridge (I replaced the neck J with the MM and didn’t feel like removing the bridge one). They are wired in parallel to a single volume pot. There are just holes where the other V and the T pot used to live.
 
1 pickup or P bass - Tone
2 pickups or PJs - blend (Bourns linear, 100%/100% center) + tone
J bass - original.
3 pickups - no way.
All passive.

bourns m-n.jpg
 
  • Like
Reactions: superblues
Passive: VVT
Active 1: Volume, balance, neck LPF frequency, neck Q, bridge LPF frequency, bridge Q.
Active 2: Volume, balance, bass, treble, mid level, mid frequency.
 
Passive: Volume, Blend, Tone (Two volumes and a tone? Nope)

Active: Volume, Blend, Treble +/-, Bass +/- (No mids on the axe, prefer them on the amp. These two I can add or subtract a little edge on top, and beef up or thin out the deep end. Mids ? Mids ? I don't need no steenking mids !)

 
  • Like
Reactions: Gilmourisgod
A single volume and tone, P-bass style.

As a side note, I just mostly use these two controls to "balance" the output of my bass between playing with a pick or fingers. For me (might be just me, lol) when I play with fingers, the sound (attack) is bigger and boomier, so I cut the volume a little and open up the tone control a bit. When I play with a pick, the sound is more sharp-edged and defined, so I roll back the tone control to make it a little softer and cut a bit of fret noise out.