• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Cure for Hum?

great post! I just bought a HW1 2006 fender jazz, has some unknown 10 pole pups that sound great, had a custom wire job from what I can tell. 2 vol one for each pup and a tone. Should be blend, vl then tone right? And when the vols are in diffrent positions i get crazy hum at home, not at the store..... maybe need to check the ground in the outlet?

Do you have fluorescent lights at home? Or is the microwave going all day long? Or are you standing an inch away from your amp? Any of the above can cause hum. As can dubious grounding in the house electrical system. One location I play in a lot has fluorescent lights and the power outlets are 2-prong, not 3-prong. Before shielding the noise from my bass was really bad, even WITH humbuckers. After shielding it is silent.
 
Someone mentioned on the original shielding thread that after a while, the copper foil can come loose, as over time the glue decays. Might be worth it to see if that happened to your bass. Or if a ground wire came loose on the inside.

Well I am gonna take it into work on my nightshifts and have a look anyway. I have plenty of the copper tape left so could do it again if need be.

Anyway off to bed with about 4 NS2's on my ebay watch list lol. Even more money spent due to TB :help: