1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD Custom Overwater Black and Maple PJ Bass

Discussion in 'For Sale: Bass Guitars' started by melikecookies, Oct 6, 2018.


  1. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    Price:
    1500
    Strings:
    4
    Location:
    Pennsylvania
    Up for grabs is a beautiful PJ bass I had made in 2018 by the lovely crew at Overwater. It is super lightweight - weighing in at a mere 7.6 lbs. I think the black and maple looks stunning and it sounds even better than it looks. The electronics are an active 3 band EQ and the controls are as follows from top to bottom: 1) Stacked - Volume (top), pick-up Blend (lower) 2) Stacked - Treble (top), Bass (lower) - cut and boost/center ‘flat' 3) Stacked - Mid control; Lower - frequency sweep, top cut and boost 4) Passive tone/treble roll off. The neck is maple and I requested it to be thin from front to back - 21 mm depth at 1st fret and 24mm at the 15th. Not only is the 33” neck profile slim, but it also has 1.45" nut width and 16.5mm bridge spacing. Body is reduced size precision shape - lightweight swamp ash and it comes equip with Overwater Noiseless pickups. Black hardware, Neutrik Locking jack, b/w/b pickguard. The body is gloss black and the neck is finished. Skip the wait and purchase this one for a deep discount. Pics below:

    20180918_151428_zpsren4fzny.jpg

    20180918_151540_zpsyygbsbth.jpg

    20180918_151630_zps5huoad2u.jpg

    20180918_151554_zpsbwvaiuuo.jpg

    20180918_151600_zpsoohwk6rq.jpg

    20180918_151613_zpsg6eijmhu.jpg

    20180918_151618_zpsxgnlujj7.jpg


    Comes with the original Overwater hardshell case. The one and only trade I will entertain is for a Moollon Precision, to which I will add cash to on my end. Outside of that, this one is for sale only. Price is negotiable for a local sale - I'm not too far from the DMV area and I'm willing to meet in the surrounding states. Please do not hesitate to contact me with any additional questions. Thanks for looking, have a wonderful day!
     
    Last edited: Apr 7, 2020
    Bigoo7e, jebmd, NYCBass and 3 others like this.
  2. 123321

    123321 Am Comfortably Dumb...

    Feb 1, 2004
    Virginia
    WOW!! The maple in that neck looks "delicious"... Outstanding looking instrument!!
     
  3. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    I was previously holding this bass for another member. Haven’t heard from them so this one is back on the market.
     
  4. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    This one is back up for grabs as I've realized that having 2 PJs is a bit excessive. This was my main gigging bass last year, but no major cosmetic blemishes. Full disclosure - in inspecting the bass, I did notice that there are a few indentation lines in the paint on the back of the bass. I could barely get them to show up in a photograph, and they are extremely hard to see unless you are looking for them. Nothing through the wood and it certainly does not affect playability. Another thing is, when it was recently set up, the nut was cut slightly too low for the new G string. My tech put a thin layer in the slot to prevent any type of buzz. Outside of that, it is still a great sounding, feeling, and playing bass. The electronics and truss rod are both in working order. Recent pictures of the bass:
    20200407_163022.jpg
    20200407_163033.jpg
    20200407_163050.jpg
    20200407_163058.jpg
    20200407_163131.jpg
    20200407_171911.jpg 20200407_163158.jpg
    20200407_163202.jpg 20200407_171825.jpg
     
    Last edited: Apr 7, 2020
    bassballs27, jebmd and Dave rosener like this.
  5. GSNOLA

    GSNOLA Opinionated but approachable 4-string Scotsman. Supporting Member

    Aug 2, 2010
    New Orleans
    Since trades are not an option (?!?) I’m going to have to figure out how to sell a couple of things! That’s a lovely bass.
     
    melikecookies likes this.
  6. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    I can promise that you won’t regret it!
     
  7. simongpaez

    simongpaez Supporting Member

    Feb 28, 2005
    The Woodlands , Texas
    Nice bass!!!
     
    melikecookies likes this.
  8. DougalPye

    DougalPye

    Sep 28, 2018
    Pgh, PA
    Cool bass. What was the slot on the nut filled with?
     
  9. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    My luthier stated that he made a baking soda paste and filed it down. No buzzing on any note and the action is low.
    Cheers
     
    DougalPye likes this.
  10. 6and5

    6and5 Supporting Member

    Oct 31, 2016
    San Diego
    The neck has a gloss finish, correct?
     
  11. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    That is correct.
     
  12. 1stchopper

    1stchopper

    Jun 15, 2006
    Message sent
     
    melikecookies likes this.
  13. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    Message replied :)
     
  14. melikecookies

    melikecookies

    Sep 19, 2012
    York, PA
    Sold
     
    purpleflyhunter likes this.
  15. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    Apr 22, 2021

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.