Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Darkglass Anagram Multi FX Announced
- Thread starter Elmstreet
- Start date
Yeah you just plug it in and that’s it. I use it like this all the time.
It’s going to depend on your DAW but it should just show as an input and output device
How's the quality compare to other audio interfaces? Just curious about your opinion.
Seems fine, I’ve never noticed to much difference in audio interface (in recent years) we’re long past the days of random high noise floors.
Thank you, I already have it working, I just had to change the cable.
IvanBassist
Commercial User
- Jun 8, 2008
- 3,754
- 11,151
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
I use mine always with my dedicated UAD Apollo. It has much more flexible routing options, on top of real time plugin processing
It's such a shame that the new Nembrini Delay 3000 block doesn't have all the controls that the desktop version does. I wonder if Nembrini might upgrade it in the future?
IvanBassist
Commercial User
- Jun 8, 2008
- 3,754
- 11,151
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
You could contact him directly and ask for the features. I doubt he reads Talkbass
Recreated my fave compact analog build with my Anagram. Same chain:
Octave>DCX>Noble/B15
Footswitch 3 toggles between a clean DI signal from a Noble block to an Ampeg head and B15 Cab if I want a bit of amp character.
Also changed the stock knobs to this black one I found in amazon.
Octave>DCX>Noble/B15
Footswitch 3 toggles between a clean DI signal from a Noble block to an Ampeg head and B15 Cab if I want a bit of amp character.
Also changed the stock knobs to this black one I found in amazon.
Interesting idea with the black knobs! What do the pots look like without the knobs?
My biggest fear with the Anagram is damaging those knobs. Especially when carrying in a bag instead of a flightcase and them being pressed in too far/ hard or any sideways friction against the knobs. Will probably not be a thing when I get a decent flightcase.
That was something I thought about too. Anyone know if there’s a cover that you can put on when it’s in a soft board bag that will keep pressure off of the screen and knobs?
Actually I just found one when I searched on google instead of just wondering…
Nice! Exactly what I need as well. Don't have a 3D printer myself so this is a good option.
I sent them an email and this is their response:You could contact him directly and ask for the features. I doubt he reads Talkbass
Thanks for reaching out, and thank you for supporting our Anagram Marketplace releases.
The current Anagram version of DELAY3000 is a more streamlined version of the desktop plugin. We are continuing to work on our Anagram products, and we plan to expand them with additional features where possible, including some of the controls currently missing from DELAY3000.
I’ve also noted your feedback regarding the Modulation, Filter, and especially the Ducking section.
And thank you for the Tube Rotosphere suggestion, I’ll add it to our list of requests for future Anagram releases.
We really appreciate your support of our Anagram plugins and the PSA1000.
So, it looks like there is hope for the future. If they add all the missing items, I'll definitely pick it up. And if the rotosphere shows up in the Marketplace, I'll pick that up as well.
This mày be a long shot, but I’m wondering if anyone would be able/willing to 3D print a Pedalboard that is just big enough to fit an anagram and a Shure GLXD16+. I know there are many people who use this exact rig.
Right now I’m using a Pedaltrain nano, but I need to shrink it by about 2 inches or so. I don’t use it on the floor, it sits on top of my bass vault behind me on stage, and I just reach back to switch my scenes when necessary.
Anyway, the feet on the nano are slightly off the edge of the vault, and if I could get a board that’s a little less wide, I think I’d be golden.
So, like I said at the start, I know it’s a long shot but I’m hoping someone can/will do that. I’ll pay of course.
Thanks for reading, and if you are interested, you can reply here or send me a message.
Thanks
Right now I’m using a Pedaltrain nano, but I need to shrink it by about 2 inches or so. I don’t use it on the floor, it sits on top of my bass vault behind me on stage, and I just reach back to switch my scenes when necessary.
Anyway, the feet on the nano are slightly off the edge of the vault, and if I could get a board that’s a little less wide, I think I’d be golden.
So, like I said at the start, I know it’s a long shot but I’m hoping someone can/will do that. I’ll pay of course.
Thanks for reading, and if you are interested, you can reply here or send me a message.
Thanks
Attachments
This mày be a long shot, but I’m wondering if anyone would be able/willing to 3D print a Pedalboard that is just big enough to fit an anagram and a Shure GLXD16+. I know there are many people who use this exact rig.
Right now I’m using a Pedaltrain nano, but I need to shrink it by about 2 inches or so. I don’t use it on the floor, it sits on top of my bass vault behind me on stage, and I just reach back to switch my scenes when necessary.
Anyway, the feet on the nano are slightly off the edge of the vault, and if I could get a board that’s a little less wide, I think I’d be golden.
So, like I said at the start, I know it’s a long shot but I’m hoping someone can/will do that. I’ll pay of course.
Thanks for reading, and if you are interested, you can reply here or send me a message.
Thanks
Hey Guys, Thinking about getting a Anagram and have a few questions, first my band plays in standard tuning, 1/2 step down and a few songs a whole step down, now could I set up the Anagram to either have the A button in standard tuning, B a 1/2 step down and C a whole step down all with the same sound or different sounds with each button..or bank 1 with all 3 buttons in standard tuning with different/same sounds, Bank 2 all 3 buttons a 1/2 step down with different or the same sound and 3rd Bank a whole step down with the same or different sounds..Also I know you have to push 2 buttons to switch banks is there a external device, maybe the Darkglass MIDI Footswitch. that would work with the Anagram that have more buttons so maybe I could just push 1 button to switch banks, I don't want to go to switch presets using A B or C button and accidentally push 2 buttons and switch banks...Thanks in advance for all answers...
Last edited:
Yes you can set it up in all of those ways its pitchshifter works really well for down tuning.
You can setup the Darkglass MIDI foot switch or any other midi controller for additional foot switches
Thanks Man, now the only thing that might concern me is the Warranty is not transferable through Darkglass or If the person bought it from Sweetwater so I would have no warranty is bought used...
