• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Different volume on strings?

Did you recently change strings? Some types, and I suppose possibly sets within types depending on sample-to-sample variance, don't have even response across the strings. For example, when I tried Dean Markely Nickel Plated Steel on my P-bass, I found the E and A sounded perfect, but the D and G were ridiculously weak. On the same bass, Blue Steels of the same gauge sound great.

Otherwise, it's usually the factors Relic mentioned IME.
 
I've measured it with a ruler do it's not neck relief.

measured what? any measurements are meaningless unless you measure both before and after the problem began.

was this a sudden problem or one that could have developed slowly?

If you really don't think it is setup related, I would recommend removing the pickups and inspecting them for damage. Make sure if there is a plastic casing the wire is wrapped around, that it isn't cracked, etc.
 
AcidShred,

Have you tried your bass on a different amp since the D and G strings started sounding dead? It's not a strong possibility, but the amp could be causing the issue...you might want to eliminate that possibility before you go any further.

Otherwise, raise the pickup on the D/G side and change out your strings to see if that helps.