• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

DiMarzio Model P and Lace Alumatone MP3 samples

Jul 31, 2008
11,868
21,967
Austin, TX
I've had some people asking about the Alumatone P pickups and the DiMarzio Model P's, so while I was doing some sound clips with other basses, I thought I'd do a sample of these two basses as well.

A couple caveats -

1) I recorded direct into a Line 6 Toneport (GK sim with 4x10 cab) for both samples, and used the exact same settings.

Normally I would adjust the settings according to the bass, but in this context I feel it gives you a better idea of the sheer tonal difference between these bass pickups

2) The bass with the DiMarzio has a maple fingerboard, the one with the Lace has a rosewood.

3) The bass with the Lace Alumatone is set up for old school thump. Older strings, higher action, etc - so this accounts for a small difference in the tones.


Both basses are alder body Precisions strung with D'Addario Chromes (45-100) - as mentioned, the P with the Lace has older strings

The same cable and amp settings were used, sounds were recorded one right after the other.

[Invalid or Expired Link Removed]

As you can hear, there are VAST differences between these pickups - far more than older strings and a rosewood fingerboard could account for.

The Lace has TONS more low end, a bit more highs, but is flatter through the mids. Normally I'd back off the low end with this bass, but I wanted a more direct comparison to the DiMarzio equipped P Bass.

The DiMarzio has a bunch more midrange punch, but not nearly the low end "beef" that the Alumatones have.

All in all, VERY different pickups. If you want to hear a sound sample of the Lace Alumatone by itself I can record one. Of course I'll dial in the amp a bit for it. It's a really nice pickup for getting some low end "thump" in your sound.
 
I've had some people asking about the Alumatone P pickups and the DiMarzio Model P's, so while I was doing some sound clips with other basses, I thought I'd do a sample of these two basses as well.

A couple caveats -

1) I recorded direct into a Line 6 Toneport (GK sim with 4x10 cab) for both samples, and used the exact same settings.

Normally I would adjust the settings according to the bass, but in this context I feel it gives you a better idea of the sheer tonal difference between these bass pickups

2) The bass with the DiMarzio has a maple fingerboard, the one with the Lace has a rosewood.

3) The bass with the Lace Alumatone is set up for old school thump. Older strings, higher action, etc - so this accounts for a small difference in the tones.


Both basses are alder body Precisions strung with D'Addario Chromes (45-100) - as mentioned, the P with the Lace has older strings

The same cable and amp settings were used, sounds were recorded one right after the other.

[Invalid or Expired Link Removed]

As you can hear, there are VAST differences between these pickups - far more than older strings and a rosewood fingerboard could account for.

The Lace has TONS more low end, a bit more highs, but is flatter through the mids. Normally I'd back off the low end with this bass, but I wanted a more direct comparison to the DiMarzio equipped P Bass.

The DiMarzio has a bunch more midrange punch, but not nearly the low end "beef" that the Alumatones have.

All in all, VERY different pickups. If you want to hear a sound sample of the Lace Alumatone by itself I can record one. Of course I'll dial in the amp a bit for it. It's a really nice pickup for getting some low end "thump" in your sound.

The first one on that audio clip is the lace then?
To my ear, the second one lacks definition and sound very muddy... but that may well due to the lap top speaker I am listening to right now...
 
Thanks a lot for the clips. I just put the Model Ps in my parts P and they're working for me pretty well. My only complaint is that the Dimarzios have very little versatility. I can't shape them very well with my EQ, as they don't have a whole lot of treble to work with. I'm the sort of person that only wants to cut frequencies rather than add, so it's kind of a problem for me. =) However, they do that one sound very well for such an inexpensive pickup (I think I got my set for $50 from someone on TB). I'll probably swithc them out eventually, but they do what I need them to right now.