• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Do you use an amp stand?

You wouldn't want to get caught then. Call it a beer crate.

Did I say milk crate? Actually, it's a, uh, secret, de-classified red meat, hard liquor and hand gun transport cubicle, with, um, pictures of hot chicks all over it and a donation slot to help Save The Puppies. I got it from this guy:

40043477_384x288_generated.jpg
 
Vox used to make the must beautiful amp stands that attached to the sides of the cabinet with two large bolts. There was a nice chrome wheel to tighten up and lock the cabinet at any angle . These stands ( for American Vox) were made by a company that also made shopping carts for supermarkets and they had a great chrome job!

The Fender twin reverb, I think about 1965 version ... same thing ...If you are handy enough you could make one to fit your cab.
 
I've used some form of stand 4 the last 20 yrs, as my ears r on my head n not my hips so I can hear better at whatever volumes r being forced on me 2 play at by Marshall stacks or ham fisted thumpers. The perceived loss of bass is actually just a heightened awareness of the mids so as long as you keep the cab under about 2 1/2 ft off the ground u still get the coupling with the floor n if u feel u need more bass, use ur amp's eq to boost bass or cut mids/highs. I haven't had boom or wolf tones since I learnt this lil trick back in '90 courtesy of an enlightened sound guy. Also, bass amp eq is probably more effective when used for cutting rather than boosting, although its a finer art n more fiddly n finicky than simply boosting. My 2c.
 
I tried to use some hard rubber blocks to lift my 112 combo about 2 inches off the floor and these cleaned up some boominess. It used to be pretty bottomy towards the side of the combo but it sounds more even. The room effect less which might be a good thing to get consistent result.
I don't know if combos are designed to be placed on the floor to maximize the response.
I have to test more to find out which way I like better.
 
I live in an old Boston apartment, very noise sensitive.

When I practice at home with my small amp, would an amp stand help me hear myself better, at the same time, put out less overall sound everywhere else except my ears?

I'm not jamming with anyone, just playing alone.
 
I find it essential to tilt the cab at an angle toward my head. Adding a cab doesnt do that...instead of blowing at my legs, it just blows at my back. Of course a fridge is at a nice level, but i hardly ever do that anymore.

Many years ago i saw on the grand ole opry a fantastic looking bass amp stand, and havent found it since. It was a rack that held the entire amp and cab in a metal frame. That metal frame was hinged in the middle and sat inside another frame which sat on the floor. So you could loosen the knobs on the side, push the top of the whole amp and cab backwards, then lock the knobs. Looked great. When i saw it, it was used with an svt and a 410 but i think it would accomodate a fridge as well. Wish i could find a pic of it. Concept is sort of like a floor fan that sits in a frame, but you can loosen the fan cage to tilt it.

I use a few different devices. Simplest for me is a triangle shaped rubber chunk that i set under the cab, to tilt it backwards. My micro head has hooks on the side which grab the front of the cab fram so the head doesnt end up on the floor. Also have couple of different cab stands that tilt at an angle, but my simple approach works best for me.

you could adapt one of these.
ps crap phone photo but its a adjustable shop mirror