Eden Navigator - voltage

[agedhorse]

That is not a clip light. It is a light as a guide to let you know when the preamp has the hottest possible clean signal to send to power section. And that point is when the input gain is set properly it flcks on momentarily with one's loudest note. If it stays on the tone will sound distorted.

Ok, let me simplify this… the level LED has nothing to do with loading, it's there to help with gain structure.

 

[dbsfgyd1]

Ok, let me simplify this… the level LED has nothing to do with loading, it's there to help with gain structure.

Exactly.

 

[Bassmann1968]

Calling out for Armin (@Bassmann1968). Hey Armin, can you pop in here and help this fellow having problems with his Eden Navigator?

I'm not convinced that it is a faulty NAV.
There were a lot of good ideas what to do already.
The best one still is, to determine which unit(s) has/have the problem.

 

[DrumsAndBass]

Have you tried another amp/head and get to near volume? Yes, that is a "monster" cab but you may have over driven it and now you are hearing speaker damage.
There are a lot of speaker red flags in your posts. When pushing that close to redline It only takes that one little extra boom or thump to cause damage, and that damage may just show up at certain frequencies or volumes.

Yes, I will check another fEARful stack I have.
Good tip, thanks.

 

[DrumsAndBass]

I will troubleshoot the whole rig. I am reminding myself about how to do all of that. For 11 years, this power amp, HPF and cab have been plug and play.
The fEARful 1515/66 was the first component I bought.
Okay, I will get to it all. I'll get it all back up to speed , have to , by mid January.

I appreciate all of the input from you folks here on TB.

Thanks.